Daily Papers

Vision-Language-Action (VLA) models are commonly pretrained on robot demonstrations by jointly mapping visual observations and language instructions to actions. However, dense visual-action supervision can dominate the comparatively sparse language-action signal. As a result, policies may rely on visual shortcuts rather than learn how language conditions action execution, making them sensitive to visual variations. To address this limitation, we propose LA4VLA, a language-action pretraining framework that enables policies to acquire language-conditioned action priors without visual observations. These priors capture reusable manipulation skills shared across tasks and scenes, reducing reliance on scene-specific visual cues. Specifically, LA4VLA decomposes expert demonstration trajectories into atomic action segments and pairs each segment with a corresponding low-level action description. This yields LA4-33K, a dataset of 33K Language-Action (LA) episodes derived entirely from existing demonstrations without additional robot data collection. We further develop LA4VLA-1B, a lightweight 1B-parameter VLA model, and investigate three paradigms for incorporating language-action supervision into VLA learning: LA-only pretraining, sequential LA-to-VLA pretraining, and mixed LA-VLA pretraining. Across simulation and real-world tasks, LA-pretrained policies consistently outperform matched VLA-pretrained counterparts, while combining LA and VLA supervision leads to further gains. In particular, mixed LA-VLA pretraining improves the average success rate of LA4VLA-1B over the no-pretraining baseline by up to 17.8 and 45.0 percentage points in simulation and real-world tasks, respectively. These results establish LA4VLA as an effective and complementary pretraining strategy for building stronger and more robust VLA policies.

Astra can act, yet reliable manipulation depends on the system through which it observes and controls the world. We introduce PhysEvo, a framework for physical recursive self-improvement (RSI) around a single frozen model. A task agent executes robot tasks; a meta-agent uses the resulting trajectories to diagnose failures, revise tools and skills, and test corrections. The meta-agent can also improve its own diagnostic tools, so retained revisions support both later action and later self-improvement. This process develops joint-level control, evidence-seeking observation, and reusable manipulation skills without model-weight updates or a separately trained action policy. Across 42 RoboDojo tasks, held-out-layout evaluation of retained task-specific deployment versions yields a five-dimension average score of 68.14/100 and 62.00% success, compared with 47.17% for RoboDawn's one-shot Astra agent, the strongest published reference in our comparison. On eight manipulation tasks challenging direct Astra, PhysEvo achieves 55.00% success, compared with 1.25% for the direct-Astra reference. Deploying the simulation-evolved harness on AgileX PiPER and continuing skill revision yields 90.60/100 average score and 84.00% success across 25 trials on five real-world tasks. PhysEvo turns the consequences of action into persistent, testable changes to how a frozen model acts and improves.

Real-world videos provide rich demonstrations of manipulation, but turning them into reusable robot skills requires visually aligned environments, executable physical interactions, and mechanisms for learning from experience. We introduce Real2Gym, an agentic Real2Sim2Real framework that turns human and robot demonstrations into interactive simulation gyms and brings skills acquired in simulation to physical robots. The Real2Sim module reconstructs editable scenes, aligns objects and cameras with the input, validates demonstrated or retargeted actions through native physics execution, and generates task-conditioned variations with action-feasibility checks. Within these environments, the agent generates executable code for manipulation stages, observes their outcomes, and distills successful attempts and failures into reusable task procedures, object-relative motions, and recovery strategies. Through a shared perception-and-control interface, these skills guide subsequent execution in simulation and on real robots, with motions adapted to current observations and no updates to the underlying model weights. Extensive evaluations demonstrate that Real2Gym enables high-fidelity simulation environment reconstruction, outperforming GPT-6 Astra Direct Mode by 16.7% in success rate with approximately 74.9% fewer policy-execution tokens across these environments, while exceeding it by 33.3% in physical robot execution success rate across four tasks on a real Franka robot.

While vision-language-action models have demonstrated impressive zero-shot manipulation capabilities, they remain fundamentally black box policies that are difficult to interpret, adapt, or correct when they inevitably fail. In this work, we propose ARCHITECT, a framework that treats robot policy acquisition as an interactive program synthesis task. ARCHITECT leverages the reasoning capabilities of LLM coding agents to synthesize modular robot programs that utilize a suite of perception and control tools. Unlike end-to-end models where distribution shift leads to unpredictable, cascading failures, our modular architecture allows users to isolate failures and localize feedback at the level of abstraction required. We introduce an iterative process where a human supervisor provides natural language corrections to steer the policy. These corrections are grounded in the policy code by program execution traces and distilled into a persistent skill library, a form of long-term in-context learning which enables the agent to accumulate a repertoire of reusable, interpretable behaviors. In a benchmark evaluation on a Franka Panda robot, ARCHITECT outperforms state-of-the-art VLA models and program synthesis baselines on complex, long-horizon tasks, including articulated object manipulation and cloth folding. Our results demonstrate that the synthesized skill library enables the system to transfer to novel tasks with decreasing human intervention, providing a steerable and data-efficient alternative to black-box robot learning. Website: https://robo-architect.github.io/

Manipulation behaviors vary widely across objects and scenes, but they share a small set of reusable skills, and planning with these skills helps embodied agents generalize to new tasks. Yet an agent can only plan with skills it knows. Recovering skills from observed experience, the inverse of planning, builds this knowledge over time and yields skill data for training future agents. Vision-Language Models (VLMs) describe individual manipulation events well, but can they organize a stream of events into reusable skills? We formulate this problem as Streaming Embodied Skill Discovery (SESD): a model watches videos in sequence and maintains a persistent skill library that shapes its later decisions. To systematically measure this ability, we introduce Video2Skill, a benchmark that covers robot tabletop manipulation and human kitchen activity and tests three core capabilities: (i) locating manipulation events in time, (ii) grouping events of the same transformation, and (iii) deciding when to reuse an existing skill or create a new one. Across 19 open-source VLMs, many models group events at near-chance level, and scale does not consistently help. Their errors depend on how perception and library updates are coupled: joint models merge distinct transformations into one skill, while models that update the library from text descriptions duplicate recurring ones. Supervised fine-tuning, including our counterfactual library-state rebalancing (CLaRe), improves grouping but exposes a deeper bottleneck: trained models consolidate familiar skills yet rarely expand the library. Their libraries stall below half the reference size, and transformations unseen in training are located in time but almost never given a new skill. Recognizing when existing skills are insufficient thus emerges as the central challenge.

Large language model (LLM) planners can decompose natural-language instructions and select reusable robot skills, but choosing the correct skill does not guarantee successful physical execution. This gap is especially important in humanoid loco-manipulation, where errors during approach, grasping, transport, or placement can invalidate the remainder of a long-horizon plan. We present FRAMES, a failure-aware supervisory framework for the Unitree G1 humanoid that operates above the CEER whole-body controller. A Planner Agent selects subtasks through parameterized mid-level skills, while a vision-language-model-based Monitor Agent evaluates each skill using temporal multi-view observations and structured robot and contact evidence. Detected failures stop the active skill and provide grounded feedback to a Recovery Agent. The framework further includes a Memory Module for reusing prior skill experience, and geometric grounding via depth and segmentation. We independently evaluate the monitoring module of the framework in MuJoCo using 100 trials comprising 50 failed and 50 successful executions across five tasks. The monitor detects 48 of 50 failures, correctly accepts 46 of 50 successful executions, and achieves 94.0% overall accuracy. These results provide initial evidence for the monitoring component, while end-to-end evaluation of the complete recovery loop remains ongoing.

Human videos offer a scalable source of demonstrations for dexterous robot manipulation. However, existing human-to-simulation-to-robot (Human2Sim2Robot) pipelines rely on predefined procedures that struggle to accommodate diverse object properties and interactions, particularly those involving articulated and deformable objects. We introduce DexAgent, an agentic Human2Sim2Robot framework that converts a single egocentric human video and a task prompt into physically grounded robot trajectories for policy training. It operates through four stages: semantic understanding of human videos, property-based simulation reconstruction, robot trajectory optimization, and robot data generation. At each stage, DexAgent adapts its approach to the task and object properties by selecting suitable skills from its tool library or developing new ones when needed. Property-specific verifiers assess stage outcomes for physical validity and task-specific requirements and provide feedback for refinement, preventing error propagation through the workflow. This adaptive, verification-guided process allows DexAgent to process diverse objects and long-horizon tasks. In the final stage, DexAgent varies object and robot states in simulation to generate diverse robot trajectories from a single human video, then retextures the rendered observations to facilitate sim-to-real transfer. Newly developed skills and verifiers are retained in its tool library, making it self-evolving to accumulate reusable capabilities. This reduces processing time as DexAgent encounters more human videos. Across eleven real-world tasks, policies trained with DexAgent-generated data achieve a 3.5x higher success rate than competing baselines. Project website: https://dexagent123.github.io/.

We tackle real-world long-horizon robot manipulation tasks through skill discovery. We present a bottom-up approach to learning a library of reusable skills from unsegmented demonstrations and use these skills to synthesize prolonged robot behaviors. Our method starts with constructing a hierarchical task structure from each demonstration through agglomerative clustering. From the task structures of multi-task demonstrations, we identify skills based on the recurring patterns and train goal-conditioned sensorimotor policies with hierarchical imitation learning. Finally, we train a meta controller to compose these skills to solve long-horizon manipulation tasks. The entire model can be trained on a small set of human demonstrations collected within 30 minutes without further annotations, making it amendable to real-world deployment. We systematically evaluated our method in simulation environments and on a real robot. Our method has shown superior performance over state-of-the-art imitation learning methods in multi-stage manipulation tasks. Furthermore, skills discovered from multi-task demonstrations boost the average task success by 8% compared to those discovered from individual tasks.

Data-driven approaches struggle with precise manipulation; imitation learning requires many hard-to-obtain demonstrations, while reinforcement learning yields brittle, non-generalizable policies. We introduce VisuoTactile Local (ViTaL) policy learning, a framework that solves fine-grained manipulation tasks by decomposing them into two phases: a reaching phase, where a vision-language model (VLM) enables scene-level reasoning to localize the object of interest, and a local interaction phase, where a reusable, scene-agnostic ViTaL policy performs contact-rich manipulation using egocentric vision and tactile sensing. This approach is motivated by the observation that while scene context varies, the low-level interaction remains consistent across task instances. By training local policies once in a canonical setting, they can generalize via a localize-then-execute strategy. ViTaL achieves around 90% success on contact-rich tasks in unseen environments and is robust to distractors. ViTaL's effectiveness stems from three key insights: (1) foundation models for segmentation enable training robust visual encoders via behavior cloning; (2) these encoders improve the generalizability of policies learned using residual RL; and (3) tactile sensing significantly boosts performance in contact-rich tasks. Ablation studies validate each of these insights, and we demonstrate that ViTaL integrates well with high-level VLMs, enabling robust, reusable low-level skills. Results and videos are available at https://vitalprecise.github.io.

Reusable skills are a key mechanism for extending agent capabilities, allowing agents to accumulate experience and solve increasingly complex tasks. Yet most existing skill-learning methods store reusable experience as text-only assets, such as instructions, reasoning traces, or summarized trajectories. We argue that this text-only paradigm creates a fundamental bottleneck for visual-centric tasks, where reusable knowledge often depends on spatial layout, visual grounding, fine-grained appearance, and localized state changes. To address this limitation, we propose \NAME, a multimodal skill paradigm that combines declarative textual logic with explicit visual support. We distinguish three reusable forms: static priors for stable spatial conventions, dynamic priors for in-situ visual working memory, and interleaved visual skills that bind ordered text steps to the source frames, screenshots, or page regions that justify them. Rather than only describing what to do, visual skills also encode where to look, how to inspect, and how to verify visual outcomes. To scale visual-skill construction, we introduce \SYSTEM, an automatic system that converts agent experience into reusable multimodal skills by preserving textual reasoning, spatial references, visual boundaries, and interaction patterns from task trajectories. Experiments on GUI and other visual-centric tasks show that visual skills consistently outperform text-only skills, particularly when success requires spatial correspondence, visual evidence, and state-aware interaction. These results support our central position: reusable agent skills should go beyond text and become multimodal assets for future multimodal agents.

Large language model agents increasingly store reusable procedures outside the model. These reusable procedures are often called skills: they may be code functions, natural-language instructions, SKILL.md packages, workflow graphs, or learned adapters that a future agent can retrieve and invoke. This taxonomy-driven survey asks how such skill libraries change over time. Across a 124-paper 2023--2026 audit set, we synthesize dynamic skill systems as lifecycle-managed, verified, evolving artifact stores: agents collect evidence from interaction, propose skill updates, verify and admit candidates, organize them for retrieval and composition, repair or prune stale entries, and govern sharing through provenance and rollback. We organize the literature around three survey tools. First, a six-sense taxonomy distinguishes the structurally different artifacts called ``skills'' in current papers. Second, an eight-stage lifecycle architecture identifies the recurring design decisions behind evidence acquisition, proposal, verification/admission, storage, retrieval/composition, maintenance, distillation/portability, and governance. Third, a lightweight skill-record schema and ten-operator vocabulary provide common terms for comparing library updates without elevating them into a separate method contribution. Using this structure, we synthesize evidence-graded patterns with explicit caveats: admission and repair are repeatedly important, verifier quality materially affects skill-aware RL, flat retrieval can degrade as libraries grow, and current benchmarks still under-report library trajectories, usage--utility gaps, and safety surfaces. We close with concrete reporting standards and open problems for evaluating dynamic skills as changing libraries rather than static prompt or tool collections.

Generalizable manipulation skills, which can be composed to tackle long-horizon and complex daily chores, are one of the cornerstones of Embodied AI. However, existing benchmarks, mostly composed of a suite of simulatable environments, are insufficient to push cutting-edge research works because they lack object-level topological and geometric variations, are not based on fully dynamic simulation, or are short of native support for multiple types of manipulation tasks. To this end, we present ManiSkill2, the next generation of the SAPIEN ManiSkill benchmark, to address critical pain points often encountered by researchers when using benchmarks for generalizable manipulation skills. ManiSkill2 includes 20 manipulation task families with 2000+ object models and 4M+ demonstration frames, which cover stationary/mobile-base, single/dual-arm, and rigid/soft-body manipulation tasks with 2D/3D-input data simulated by fully dynamic engines. It defines a unified interface and evaluation protocol to support a wide range of algorithms (e.g., classic sense-plan-act, RL, IL), visual observations (point cloud, RGBD), and controllers (e.g., action type and parameterization). Moreover, it empowers fast visual input learning algorithms so that a CNN-based policy can collect samples at about 2000 FPS with 1 GPU and 16 processes on a regular workstation. It implements a render server infrastructure to allow sharing rendering resources across all environments, thereby significantly reducing memory usage. We open-source all codes of our benchmark (simulator, environments, and baselines) and host an online challenge open to interdisciplinary researchers.

Large language model (LLM) powered AI agents have emerged as a promising paradigm for autonomous problem-solving, yet they continue to struggle with complex, multi-step real-world tasks that demand domain-specific procedural knowledge. Reusable agent skills, which encapsulate successful problem-solving strategies, offer a natural remedy by enabling agents to build on prior experience. However, curating such skills has largely remained a manual endeavor, requiring human experts to distill rich domain knowledge into actionable guidelines. In this work, we present Multi-agent INduction and Deduction for Skills (MIND-Skill), a framework that automatically induces generalizable skills from successful trajectories with robust quality guarantees. MIND-Skill consists of an induction agent which is tasked to abstract reusable skills from successful trajectories, and a deduction agent which aims to reconstruct trajectories by following the induced skills. To guarantee the quality of the generated skills, we introduce a reconstruction loss that compares input and reconstructed trajectories, an outcome loss that enforces the correctness of the reconstructed trajectories, and a rubric loss that assesses the documentation quality and regularizes the abstraction level of the generated skills according to predefined criteria. These textual losses are jointly optimized with TextGrad, and the resulting skills are evaluated on held-out tasks unseen during optimization. Experiments on AppWorld and BFCL-v3 show that MIND-Skill consistently outperforms concurrent skill generation methods.

Reusable skills have become a core substrate for improving agent capabilities, yet most existing skill packages encode reusable behavior primarily as textual prompts, executable code, or learned routines. For visual agents, however, procedural knowledge is inherently multimodal: reuse depends not only on what operation to perform, but also on recognizing the relevant state, interpreting visual evidence of progress or failure, and deciding what to do next. We formalize this requirement as multimodal procedural knowledge and address three practical challenges: (I) what a multimodal skill package should contain; (II) where such packages can be derived from public interaction experience; and (III) how agents can consult multimodal evidence at inference time without excessive image context or over-anchoring to reference screenshots. We introduce MMSkills, a framework for representing, generating, and using reusable multimodal procedures for runtime visual decision making. Each MMSkill is a compact, state-conditioned package that couples a textual procedure with runtime state cards and multi-view keyframes. To construct these packages, we develop an agentic trajectory-to-skill Generator that transforms public non-evaluation trajectories into reusable multimodal skills through workflow grouping, procedure induction, visual grounding, and meta-skill-guided auditing. To use them, we introduce a branch-loaded multimodal skill agent: selected state cards and keyframes are inspected in a temporary branch, aligned with the live environment, and distilled into structured guidance for the main agent. Experiments across GUI and game-based visual-agent benchmarks show that MMSkills consistently improve both frontier and smaller multimodal agents, suggesting that external multimodal procedural knowledge complements model-internal priors.

Large-scale endeavors like and widespread community efforts such as Open-X-Embodiment have contributed to growing the scale of robot demonstration data. However, there is still an opportunity to improve the quality, quantity, and diversity of robot demonstration data. Although vision-language models have been shown to automatically generate demonstration data, their utility has been limited to environments with privileged state information, they require hand-designed skills, and are limited to interactions with few object instances. We propose Manipulate-Anything, a scalable automated generation method for real-world robotic manipulation. Unlike prior work, our method can operate in real-world environments without any privileged state information, hand-designed skills, and can manipulate any static object. We evaluate our method using two setups. First, Manipulate-Anything successfully generates trajectories for all 7 real-world and 14 simulation tasks, significantly outperforming existing methods like VoxPoser. Second, Manipulate-Anything's demonstrations can train more robust behavior cloning policies than training with human demonstrations, or from data generated by VoxPoser, Scaling-up, and Code-As-Policies. We believe Manipulate-Anything can be a scalable method for both generating data for robotics and solving novel tasks in a zero-shot setting. Project page: https://robot-ma.github.io/.

Achieving generalizability in solving out-of-distribution tasks is one of the ultimate goals of learning robotic manipulation. Recent progress of Vision-Language Models (VLMs) has shown that VLM-based task planners can alleviate the difficulty of solving novel tasks, by decomposing the compounded tasks as a plan of sequentially executing primitive-level skills that have been already mastered. It is also promising for robotic manipulation to adapt such composable generalization ability, in the form of composable generalization agents (CGAs). However, the community lacks of reliable design of primitive skills and a sufficient amount of primitive-level data annotations. Therefore, we propose RH20T-P, a primitive-level robotic manipulation dataset, which contains about 38k video clips covering 67 diverse manipulation tasks in real-world scenarios. Each clip is manually annotated according to a set of meticulously designed primitive skills that are common in robotic manipulation. Furthermore, we standardize a plan-execute CGA paradigm and implement an exemplar baseline called RA-P on our RH20T-P, whose positive performance on solving unseen tasks validates that the proposed dataset can offer composable generalization ability to robotic manipulation agents.

Reusable skills, which encapsulate the procedural knowledge required to solve real-world professional tasks, offer LLM-based agents a path toward self-evolution in expert domains. Existing self-evolving skill methods construct skills internally from the model's parametric knowledge or trajectories, and are therefore bounded by what the model already knows. However, the domain conventions and standard procedures underlying professional skills often lie beyond this boundary and are hard to elicit from the agent alone. To address this issue, we therefore propose a novel framework, Search2Skill, that automatically identifies the agent's capability gaps, searches external sources to address them, and distills the retrieved evidence into structured, reusable skills. Specifically, Search2Skill is optimized by a rubric-based reinforcement learning scheme that jointly improves when to search, how to search, and how to generate skills. Experiments on eight expert-level domains from three benchmarks show that Search2Skill consistently outperforms both search-augmented and trajectory-based skill-learning baselines under both streaming and held-out evaluation protocols. Further analyses show that the gains arise from skill abstraction rather than raw retrieved evidence, and that the acquired skills transfer across model scales.

Language agents increasingly rely on reusable skills to improve multi-step web automation across related tasks. A growing line of work studies online skill learning, where agents continually induce skills from previous task trajectories and reuse them in future tasks on the fly. However, existing methods mainly reuse skills at the task-level: a fixed set of skills is retrieved based on the initial task instruction and then held fixed throughout execution. This static strategy is misaligned with web execution, where the appropriate next action depends not only on the task goal but also on the current webpage state, which often transitions into situations that the initial skills fail to cover. To address this gap, we propose State-Grounded Dynamic Retrieval (SGDR), an online skill learning method that enables stepwise skill reuse for web agents. SGDR consists of three components: a sliding-window extraction process that turns completed trajectories into reusable sub-procedures invokable at intermediate execution states, a dual text-code representation that connects skill retrieval with executable action, and a state-grounded dynamic retrieval mechanism that matches skills to both the task goal and the current webpage state. Experiments on WebArena across five domains show that SGDR consistently outperforms strong baselines, achieving average success rates of 37.5% with GPT-4.1 and 24.3% with Qwen3-4B, corresponding to relative gains of 10.6% and 10.0% over the strongest baseline, respectively. The code is available at https://github.com/plusnli/skill-dynamic-retrieval.

Agentic systems increasingly rely on reusable procedural capabilities, a.k.a., agentic skills, to execute long-horizon workflows reliably. These capabilities are callable modules that package procedural knowledge with explicit applicability conditions, execution policies, termination criteria, and reusable interfaces. Unlike one-off plans or atomic tool calls, skills operate (and often do well) across tasks. This paper maps the skill layer across the full lifecycle (discovery, practice, distillation, storage, composition, evaluation, and update) and introduces two complementary taxonomies. The first is a system-level set of seven design patterns capturing how skills are packaged and executed in practice, from metadata-driven progressive disclosure and executable code skills to self-evolving libraries and marketplace distribution. The second is an orthogonal representation times scope taxonomy describing what skills are (natural language, code, policy, hybrid) and what environments they operate over (web, OS, software engineering, robotics). We analyze the security and governance implications of skill-based agents, covering supply-chain risks, prompt injection via skill payloads, and trust-tiered execution, grounded by a case study of the ClawHavoc campaign in which nearly 1{,}200 malicious skills infiltrated a major agent marketplace, exfiltrating API keys, cryptocurrency wallets, and browser credentials at scale. We further survey deterministic evaluation approaches, anchored by recent benchmark evidence that curated skills can substantially improve agent success rates while self-generated skills may degrade them. We conclude with open challenges toward robust, verifiable, and certifiable skills for real-world autonomous agents.

Dexterous manipulation is a critical aspect of human capability, enabling interaction with a wide variety of objects. Recent advancements in learning from human demonstrations and teleoperation have enabled progress for robots in such ability. However, these approaches either require complex data collection such as costly human effort for eye-robot contact, or suffer from poor generalization when faced with novel scenarios. To solve both challenges, we propose a framework, DexH2R, that combines human hand motion retargeting with a task-oriented residual action policy, improving task performance by bridging the embodiment gap between human and robotic dexterous hands. Specifically, DexH2R learns the residual policy directly from retargeted primitive actions and task-oriented rewards, eliminating the need for labor-intensive teleoperation systems. Moreover, we incorporate test-time guidance for novel scenarios by taking in desired trajectories of human hands and objects, allowing the dexterous hand to acquire new skills with high generalizability. Extensive experiments in both simulation and real-world environments demonstrate the effectiveness of our work, outperforming prior state-of-the-arts by 40% across various settings.

Reusable skills improve multimodal agents without updating model weights, but their effectiveness depends on both the evidence presented and the procedure used to read it. We introduce ViewCraft, which jointly evolves an executable evidence interface and its reading procedure. The interface selects, transforms, and organizes observations; the reader interprets the resulting views. Failure traces guide revisions, replay and paired evaluation retain useful changes, and interface projection recovers visual edits from eligible rejected joint proposals. Across eight benchmarks, ViewCraft improves over direct execution by an average of 6.1 points in task score, with gains on every benchmark. The advantage persists at a matched input-token budget. On all five multi-source tasks, the learned interface uses 8%-15% fewer input tokens than Initial skill. The learned skills also transfer across executors and outperform direct execution in every evaluated transfer, supporting evidence construction and reading as a coupled, reusable skill.

Agentic (tool-using) language models are mainly trained on tool-call traces and agent trajectories during post-training. These data provide direct behavioral supervision, but producing them requires task environments, execution, and verification, making broad tool and task coverage expensive. Publicly available skills offer another source of training data: they encode reusable tool semantics and workflows but are typically used only as inference-time context. We introduce Skill Pre-Training (SPT), a mid-training method that applies causal language modeling to SkillCorpus, a collection of public multi-file skill packages, optionally mixed with general data. To preserve relations among files within each package, we also introduce Reference Insert, a reference-aware assembly strategy that places supporting files near their mentions in the primary instruction. Experiments across multiple model scales and post-training recipes show that SPT consistently improves agentic performance over mid-training on general or trajectory data, while largely preserving general performance. Data mixture experiments show additional benefits from combining skill data with general annealing corpora. These results indicate that skill packages are a valuable data source for pre-training agentic language models.

Humanoid robots have the potential to perform dexterous manipulation in human environments, yet acquiring diverse and generalizable skills remains costly due to expensive hardware data collection and labor-intensive annotation. Recent advances in video generative models provide a promising opportunity to synthesize rich manipulation experiences from visual observations, but transferring such imagined behaviors into executable whole-body humanoid skills remains largely unexplored. In this work, we present RoboReact, a framework that automatically synthesizes whole-body humanoid manipulation skills from a single egocentric RGB-D observation. RoboReact generates human manipulation videos, extracts geometry-preserving interaction keyframes through depth-aware 3D reconstruction, and retargets them to high-DoF humanoid platforms while preserving hand-object interaction geometry. To bridge the gap between imagined plans and physical execution, RoboReact performs online object-centric re-grounding and leverages a vision-language model-guided refinement loop to adapt skills under geometric mismatch and execution deviations. The refined skills are executed through a whole-body controller, enabling coordinated whole-body manipulation and dexterous interaction. Experiments on real humanoid robots demonstrate that RoboReact generalizes across diverse object configurations and robustly recovers from execution disturbances without requiring teleoperation or human demonstrations. These results highlight the potential of combining generative models, vision-language reasoning, and closed-loop control for scalable humanoid skill acquisition.

Reusable skills are becoming a fundamental building block of Large Language Model (LLM) agents, enabling capabilities to be packaged, shared, and reused across diverse applications. However, existing security research primarily focuses on prompt injection and runtime execution, leaving security risks throughout the broader skill lifecycle largely unexplored. In this paper, we present SkillSec-Eval, a lifecycle-aware framework for systematically evaluating the security of reusable agent skills. We first characterize the skill lifecycle and develop a threat taxonomy spanning repository admission, semantic retrieval, planner selection, execution, and skill evolution. We then instantiate this taxonomy in SkillSec-Eval and conduct a comprehensive empirical evaluation using a repository of 327 real-world skills. Our study demonstrates that vulnerabilities arise at multiple lifecycle stages beyond execution, highlighting the need for lifecycle-aware security analysis of reusable agent skills.

General-purpose manipulation requires reliable behavior across embodiments, objects, and task demands. We introduce HandsOn, a composable simulation platform and benchmark for cross-embodiment dexterous manipulation. It supports five robotic arms, six dexterous hands, and approximately 200 rigid, articulated, and deformable assets in randomized scenes. The benchmark pairs 18,000 curated human demonstrations with 66 human-verified tasks: Core-50 supports demonstration-based learning and execution tests, while Transfer-16 evaluates asset and relation transfer, skill composition, and deformable manipulation without target-task training demonstrations. Qualitative real-robot rollouts illustrate sim-to-real transfer. Across diffusion, vision-language-action, world-action, and prompted VLM-based methods, the best trained multi-task policy achieves 29.1% Core-50 success. Without benchmark finetuning, GPT-6 using move_eef for palm-and-finger control achieves 5.2% on Core-50 and 1.9% on Transfer-16 over 660 trials. Trained-policy stage diagnostics expose failures in contact establishment, action coordination, and maintaining achieved goals, with additional sequencing errors in composed tasks. HandsOn provides a shared basis for investigating manipulation generalization and the limits of reliable physical interaction.

Agent skills are the de facto mechanism for extending LLM agents with reusable guidance. A skill can shape the agent's task execution, including planning, tool use, problem-solving, and validation. Prior work reported mixed results of agent skills: some skills improve task success rates, while others have no effect, increase token use and execution time, and even reduce success rates. This paper presents a comprehensive analysis of skill-induced agent failures by attributing task failures and cost regressions to specific loaded skills. We introduce a differential analysis framework that attributes a failure or regression to a skill by comparing a target skill-guided run against a no-skill or semantically matched skill reference run that solves the same task, or solves it more cheaply. We instantiate this framework on SkillsBench and SWE-Skills-Bench, yielding 307 skill-induced failures, including 125 functional failures and 182 efficiency regressions. We also build SkillTriage, a taxonomy-guided attribution tool that normalizes paired cases, extracts differential evidence, and produces triage reports. Our major findings include: (1) Skill induced functional failures are rarely caused by obviously irrelevant skills; instead, seemingly relevant skills often make the agent incorrectly implement or omit task-required implementation elements. (2) Skill-induced efficiency regressions are not explained by prompt length alone. (3) The largest sources within Excessive Procedure are excessive verification and heavy implementation pipelines, contributing 67 and 30 cases, respectively. This shows that skills often turn validation checklists and construction recipes into mandatory work. Based on our findings, we propose research topics and tooling improvements for safer and more cost-aware skill reuse.

Large Language Models (LLMs) have been shown to act like planners that can decompose high-level instructions into a sequence of executable instructions. However, current LLM-based planners are only able to operate with a fixed set of skills. We overcome this critical limitation and present a method for using LLM-based planners to query new skills and teach robots these skills in a data and time-efficient manner for rigid object manipulation. Our system can re-use newly acquired skills for future tasks, demonstrating the potential of open world and lifelong learning. We evaluate the proposed framework on multiple tasks in simulation and the real world. Videos are available at: https://sites.google.com/mit.edu/halp-robot-learning.

In-hand manipulation of pen-like objects is an important skill in our daily lives, as many tools such as hammers and screwdrivers are similarly shaped. However, current learning-based methods struggle with this task due to a lack of high-quality demonstrations and the significant gap between simulation and the real world. In this work, we push the boundaries of learning-based in-hand manipulation systems by demonstrating the capability to spin pen-like objects. We first use reinforcement learning to train an oracle policy with privileged information and generate a high-fidelity trajectory dataset in simulation. This serves two purposes: 1) pre-training a sensorimotor policy in simulation; 2) conducting open-loop trajectory replay in the real world. We then fine-tune the sensorimotor policy using these real-world trajectories to adapt it to the real world dynamics. With less than 50 trajectories, our policy learns to rotate more than ten pen-like objects with different physical properties for multiple revolutions. We present a comprehensive analysis of our design choices and share the lessons learned during development.

Real-world tool-using agents operate over long-horizon workflows with recurring structure and diverse demands, where effective behavior requires not only invoking atomic tools but also abstracting, and reusing higher-level tool compositions. However, existing benchmarks mainly measure instance-level success under static tool sets, offering limited insight into agents' ability to acquire such reusable skills. We address this gap by introducing SkillCraft, a benchmark explicitly stress-test agent ability to form and reuse higher-level tool compositions, where we call Skills. SkillCraft features realistic, highly compositional tool-use scenarios with difficulty scaled along both quantitative and structural dimensions, designed to elicit skill abstraction and cross-task reuse. We further propose a lightweight evaluation protocol that enables agents to auto-compose atomic tools into executable Skills, cache and reuse them inside and across tasks, thereby improving efficiency while accumulating a persistent library of reusable skills. Evaluating state-of-the-art agents on SkillCraft, we observe substantial efficiency gains, with token usage reduced by up to 80% by skill saving and reuse. Moreover, success rate strongly correlates with tool composition ability at test time, underscoring compositional skill acquisition as a core capability.

Software engineering (abbrev. SE) has continuously evolved through increasingly powerful forms of reuse, from source code and libraries to components and services. Recent advances in AI agents have introduced a potentially new reusable artifact: skills. Emerging agent skill repositories and marketplaces enable developers to package, share, and reuse SE expertise as reusable skills. This trend raises a fundamental question: what SE activities are being encapsulated into reusable skills? Existing studies primarily focus on a broad range of skills acquisition, safety, or benchmarking, while lacking a systematic understanding of SE-specific skills and their coverage across the software development lifecycle. To address this gap, we conduct the first large-scale empirical study of SE skills in public repositories and marketplaces. We collect and analyze a large corpus of SE skills, examining the activities they encapsulate, lifecycle coverage, evolution characteristics, and evaluation mechanisms. Our findings reveal that SE activities are increasingly becoming reusable artifacts via skills and suggest promising research opportunities for skill recommendation and engineering-oriented structuring, as well as the need for mechanisms to encapsulate high-context SE activities into reusable skills. Overall, our study provides the first activity-centric characterization of SE skills and reveals how SE activities are increasingly being transformed into reusable skills. These findings offer new insights into skill reuse, ecosystem development, and the future of agent-centric SE.

Reusable skills give agents transferable procedural knowledge, making scalable acquisition essential for extending agents beyond prior experience. Existing methods face two limitations: trajectory-based synthesis requires interactions with specific environments, while document-derived skills may lack executable evidence and verification. Source code offers a complementary path: it requires no prior agent experience yet provides executable evidence for grounding abstractions. We present Code2Skill, a fully automated pipeline that transforms selected code units into implementation-anchored records of atomic operations, composite workflows, and recurring patterns, then verifies each record through source-body-blind reconstruction and source-aware comparison. Applied to 19,769 popular, actively maintained GitHub repositories, Code2Skill produces CodeSkillBank, a grounded bank of 1,006,822 accepted records with workflow, boundary, provenance, and source-evidence metadata. Across 72 protocol-matched evaluations covering nine model settings and eight benchmarks, models augmented with retrieved CodeSkillBank skills improve by 11.7% on average over matched baselines and outperform them in 57 cases. Under a unified downstream interface, Code2Skill also outperforms trajectory-derived skill banks on all seven shared benchmarks, showing that repository-derived skills can provide useful procedural knowledge before agents accumulate sufficient interaction experience. Skills synthesized from tested AI-generated code achieve a 93.50% pass rate, compared with 93.00% for human-written code, providing initial evidence that the pipeline can expand with the growing volume of AI-generated software. Overall, Code2Skill transforms procedural knowledge embedded in repositories into grounded, verifiable, and transferable agent skills.

A key challenge in robotic manipulation in open domains is how to acquire diverse and generalizable skills for robots. Recent research in one-shot imitation learning has shown promise in transferring trained policies to new tasks based on demonstrations. This feature is attractive for enabling robots to acquire new skills and improving task and motion planning. However, due to limitations in the training dataset, the current focus of the community has mainly been on simple cases, such as push or pick-place tasks, relying solely on visual guidance. In reality, there are many complex skills, some of which may even require both visual and tactile perception to solve. This paper aims to unlock the potential for an agent to generalize to hundreds of real-world skills with multi-modal perception. To achieve this, we have collected a dataset comprising over 110,000 contact-rich robot manipulation sequences across diverse skills, contexts, robots, and camera viewpoints, all collected in the real world. Each sequence in the dataset includes visual, force, audio, and action information. Moreover, we also provide a corresponding human demonstration video and a language description for each robot sequence. We have invested significant efforts in calibrating all the sensors and ensuring a high-quality dataset. The dataset is made publicly available at rh20t.github.io

In this paper, we propose a real-world benchmark for studying robotic learning in the context of functional manipulation: a robot needs to accomplish complex long-horizon behaviors by composing individual manipulation skills in functionally relevant ways. The core design principles of our Functional Manipulation Benchmark (FMB) emphasize a harmonious balance between complexity and accessibility. Tasks are deliberately scoped to be narrow, ensuring that models and datasets of manageable scale can be utilized effectively to track progress. Simultaneously, they are diverse enough to pose a significant generalization challenge. Furthermore, the benchmark is designed to be easily replicable, encompassing all essential hardware and software components. To achieve this goal, FMB consists of a variety of 3D-printed objects designed for easy and accurate replication by other researchers. The objects are procedurally generated, providing a principled framework to study generalization in a controlled fashion. We focus on fundamental manipulation skills, including grasping, repositioning, and a range of assembly behaviors. The FMB can be used to evaluate methods for acquiring individual skills, as well as methods for combining and ordering such skills to solve complex, multi-stage manipulation tasks. We also offer an imitation learning framework that includes a suite of policies trained to solve the proposed tasks. This enables researchers to utilize our tasks as a versatile toolkit for examining various parts of the pipeline. For example, researchers could propose a better design for a grasping controller and evaluate it in combination with our baseline reorientation and assembly policies as part of a pipeline for solving multi-stage tasks. Our dataset, object CAD files, code, and evaluation videos can be found on our project website: https://functional-manipulation-benchmark.github.io

Computer-Use Agents (CUAs) are increasingly deployed in dynamic interactive environments, creating a growing need for continual skill learning during interaction. Recent approaches address this challenge by learning reusable skills from successful trajectories. However, these skill learning methods largely assume static and safe environments, overlooking risks from adversarial interactions (e.g., prompt injections) and environmental dynamics (e.g., pop-ups). In dynamic settings, such assumptions can lead to risky skill learning and brittle execution, undermining the reliability of CUAs. This raises the question: how can CUAs learn and use skills safely in dynamic environments? To address this problem, we propose SkillHarness, a framework for safe skill harnessing in dynamic environments. SkillHarness moves beyond static skill abstractions by modeling skill learning and utilization as a safety-constrained interaction process. Specifically, we introduce the skill boundary that leverages multi-source supervision signals to identify safe skills from interaction trajectories, and construct self-improving safety constraints throughout the skill lifecycle. In addition, SkillHarness introduces selective skill reuse, where tasks are guided to decompose according to context and completed through the selective activation of skill subsets. Our experiments demonstrate that SkillHarness significantly reduces the unsafe rate of learned skills by 57.1% and consistently improves execution stability under dynamic environmental changes, outperforming existing baselines.

As LLM agents are increasingly built around reusable skills, a central challenge is no longer only whether agents can use provided skills, but whether they can generate correct, reusable, and executable skills from repositories and documents. Existing benchmarks primarily evaluate the efficacy of given skills or the ability of agents to solve downstream tasks from raw context, but they do not isolate skill generation itself as the object of study. We introduce SkillGenBench, a benchmark for evaluating skill generation pipelines under a unified and controlled protocol. In SkillGenBench, a generator receives raw corpora and produces standardized skill artifacts, which are then executed under fixed harnesses and assessed with unified evaluation procedures. The benchmark covers two generation regimes: task-conditioned generation, where a task-specific skill is synthesized after the task is revealed, and task-agnostic generation, where a reusable skill library must be distilled before downstream tasks are known. It also spans two complementary procedural sources: repository-grounded instances, where procedures are distributed across code, configuration, and scripts, and document-grounded instances, where procedures and constraints must be distilled from long-form text. We provide standardized task specifications, pinned environments, and evaluation protocols centered on deterministic execution-based checks, supplemented by auxiliary signals for diagnosis. Experiments across a range of skill-generation methods and backbones show substantial performance variation, highlight the difficulty of reusable skill distillation, and reveal distinct failure modes in skill generation from software repositories versus long-form documents. SkillGenBench establishes a reproducible testbed for studying skill generation as an independent research problem in agent systems.

LLM-based agents are increasingly deployed to handle streaming tasks, yet they often remain one-off problem solvers that fail to learn from past interactions. Reusable skills distilled from experience provide a natural substrate for self-evolution, where high-quality skill curation serves as the key bottleneck. Existing approaches either rely on manual skill curation, prescribe heuristic skill operations, or train for short-horizon skill operations. However, they still struggle to learn complex long-term curation policies from indirect and delayed feedback. To tackle this challenge, we propose SkillOS, an experience-driven RL training recipe for learning skill curation in self-evolving agents. SkillOS pairs a frozen agent executor that retrieves and applies skills with a trainable skill curator that updates an external SkillRepo from accumulated experience. To provide learning signals for curation, we design composite rewards and train on grouped task streams based on skill-relevant task dependencies, where earlier trajectories update the SkillRepo, and later related tasks evaluate these updates. Across multi-turn agentic tasks and single-turn reasoning tasks, SkillOS consistently outperforms memory-free and strong memory-based baselines in both effectiveness and efficiency, with the learned skill curator generalizing across different executor backbones and task domains. Further analyses show that the learned curator produces more targeted skill use, while the skills in SkillRepo evolve into more richly structured Markdown files that encode higher-level meta-skills over time.

Reliable execution of long-horizon mobile manipulation tasks remains challenging because overall task success depends on the successful completion of multiple constituent skills. Existing benchmarks, however, still rely primarily on full-task rollouts and aggregate task-level metrics, making intermediate failures difficult to observe and analyze. We present Behavior-Skill, a benchmark that reformulates the learning and evaluation of long-horizon tasks around executable constituent skills. It contains 235,492 skill instances from 10,000 demonstrations across 50 household tasks and 34 semantic skill categories. Each instance pairs a skill instruction with an aligned observation-action segment, and is further associated with a restorable intermediate state and a skill success condition to enable independent evaluation under valid preconditions. We further introduce trajectory-level and skill-level metrics to characterize policy capability beyond aggregate task success. Extensive experiments across representative VLA policies including pi0.5 and GR00T on the complete 50-task benchmark show that failures are highly non-uniform across skills, with contact-rich manipulation skills forming persistent bottlenecks. These results demonstrate that Behavior-Skill complements full-task evaluation by exposing intermediate capability profiles for analyzing and improving long-horizon VLA policies. Behavior-Skill is publicly available at https://github.com/nubot-nudt/Behavior-Skill.

Large language model (LLM) agents accumulate rich episodic trajectories while solving real-world tasks, but it remains unclear whether such experience can be distilled into reusable procedural skills. We introduce SkillEvolBench, a diagnostic benchmark for evaluating this step from experience reuse to skill formation. It contains 180 tasks across six real-world agent environments, organized into role-conditioned task families with shared latent procedures. Agents learn from acquisition tasks, update an external skill library using compacted trajectories and verifier feedback, and then face frozen deployment tasks testing context shift, adversarial shortcuts, and composition. By comparing self-generated and curated-start skill evolution against no-skill and raw-trajectory controls, SkillEvolBench separates procedural abstraction from base capability, curated prior knowledge, and direct reuse of episodic traces. Across ten model configurations and three agent harnesses, we find that current agents often adapt locally but rarely form robust reusable skills. Skill-based conditions can improve acquisition or replay, and individual models sometimes gain on specific deployment axes, but these gains are unstable under frozen deployment. Raw-trajectory reuse frequently outperforms distilled skills, suggesting that current abstraction procedures discard contextual and procedural cues that remain useful for future tasks. Capacity and cost analyses further show that writing more skills or larger Tier-3 resource libraries is not sufficient: additional updates can improve coverage while introducing episode-specific drift and procedural clutter. These findings position SkillEvolBench as a testbed for measuring when one-off experience becomes durable procedural knowledge rather than task-local memory.

Agent Skills improve LLM agents by making task knowledge reusable across sessions. Learning transferable Skills requires evidence about a procedure and its conditions of use, which a successful task attempt can leave untested. We introduce Socratic Skill Learning (SSL), which interleaves expert teaching with Student practice. An Educator guides investigation while the Student remains the sole environment operator and Skill author, able to question, test, and adapt advice. To test reuse beyond the learning task, we construct SkillTransferBench, with 35 task families and 408 executable cases, pairing public variation specifications with held-out evaluation in fresh solver sessions. On the main 22-family, 155-case cohort, Fixed-Window SSL reaches 0.801 utility, versus 0.723 without a Skill, 0.761 for adapted Trace2Skill (trajectory distillation), and 0.751 for adapted SKILL-KD (contrastive distillation). Across three model pairs on shared families, interleaved guidance outperforms expert authoring and post-hoc teaching. Process analysis links guidance to Student writing and package revision; a case study shows the Student testing and refining a proposed procedure for later reuse. As demand for new lessons falls, the cost of fixed-window review grows. Issue-Guided SSL tracks unresolved questions across Skill revisions to select and focus review, reaching 0.805 utility with 61.7% fewer Educator tokens and 16.9% fewer total acquisition tokens than Fixed-Window SSL on the main cohort.

Agent skills are commonly distributed as SKILL.md files: human-readable procedural documents that describe workflows, tools, resources, and domain conventions. While convenient for inspection and reuse, this design requires the same reusable procedure to be repeatedly injected into the runtime context. We propose Skill-to-LoRA(S2L), a behavior-centric skill representation that replaces runtime skill text with skill-specific LoRA adapters. Rather than compressing the skill document itself, S2L models the behavioral change induced by the skill text: offline, the complete SKILL.md is used to synthesize skill-guided demonstrations; online, the full document is omitted and the corresponding LoRA adapter is dynamically loaded to activate the learned skill behavior. We evaluate S2L with Qwen3.6-27B on a 21-skill subset of SWE-Skills-Bench. Compared with the no-skill and Full Skill Text baselines, S2L improves pass rate by 2.9 and 5.2 percentage points, respectively, while reducing per-step token cost by 6.6% relative to Full Skill Text prompting. S2L matches or improves Full Skill Text on 18/21 skills and the no-skill baseline on 15/21 skills. Control experiments further show that the gains depend on skill-specific adapter alignment: Wrong-LoRA and Shared-LoRA both reduce performance. These results suggest that many procedural agent skills can be converted from runtime instructions into trainable, dynamically loadable behavioral modules. Code will be released upon acceptance.

While skill-centric approaches leverage foundation models to enhance generalization in compositional tasks, they often rely on fixed skill libraries, limiting adaptability to new tasks without manual intervention. To address this, we propose Uni-Skill, a Unified Skill-centric framework that supports skill-aware planning and facilitates automatic skill evolution. Unlike prior methods that restrict planning to predefined skills, Uni-Skill requests for new skill implementations when existing ones are insufficient, ensuring adaptable planning with self-augmented skill library. To support automatic implementation of diverse skills requested by the planning module, we construct SkillFolder, a VerbNet-inspired repository derived from large-scale unstructured robotic videos. SkillFolder introduces a hierarchical skill taxonomy that captures diverse skill descriptions at multiple levels of abstraction. By populating this taxonomy with large-scale, automatically annotated demonstrations, Uni-Skill shifts the paradigm of skill acquisition from inefficient manual annotation to efficient offline structural retrieval. Retrieved examples provide semantic supervision over behavior patterns and fine-grained references for spatial trajectories, enabling few-shot skill inference without deployment-time demonstrations. Comprehensive experiments in both simulation and real-world settings verify the state-of-the-art performance of Uni-Skill over existing VLM-based skill-centric approaches, highlighting its advanced reasoning capabilities and strong zero-shot generalization across a wide range of novel tasks.

General-purpose skills promise reusable procedural knowledge for language agents, yet semantic relevance does not guarantee execution utility: a retrieved skill may encode assumptions that conflict with the current task, execution environment, or other retrieved skills. We formalize this problem as the skill--execution misfit. To address it, we propose SkillAligner, a training-free execution-time skill adaptation framework that treats retrieved skills as adaptable drafts rather than fixed instructions. Before execution, SkillAligner performs a one-time joint adaptation that specializes useful skill fragments to task requirements, aligns their procedural assumptions with the available execution interface, and composes the resulting guidance by resolving dependencies, conflicts, and redundancy across skills. The adapted content is consolidated into a compact execution guide and reused throughout the subsequent trajectory. Extensive experiments across diverse agent benchmarks and model backbones show that SkillAligner substantially improves task performance over existing skill-use baselines, reduces skill-induced regressions at the instance level, and lowers total inference cost.

Long-horizon mobile manipulation requires a robot to navigate multi-room environments and execute a sequence of manipulation skills under a single natural language instruction. Learning and evaluating these skills present three challenges: similar observations under a fixed task instruction may make skill selection ambiguous; even when a preceding skill succeeds, the robot state inherited by the next skill may deviate from its demonstrated starting states and affect execution; and task-level metrics hinder skill-specific diagnosis, while early failures leave later skills untested. We therefore introduce ManiUnit, a manipulation skill dataset and benchmark built from 50 BEHAVIOR-1K activities. Its dataset contains 137,899 segments across 21 skill types and 417 subtasks, and its benchmark contains 1,260 test instances. Correspondingly, ManiUnit pairs each segment with an explicit subtask instruction; measures sensitivity to perturbations of the robot's starting base position or joint configuration; and restores intermediate simulator states and defines local success conditions so that each skill can be evaluated without executing preceding stages. Evaluations of representative vision-language-action (VLA) policies show that similar aggregate scores can hide substantial per-skill differences. The tested starting-state perturbations also degrade execution: on the full benchmark, joint perturbations reduce success rates by approximately 56% relative to those from demonstrated starting states. On two long-horizon activities, a skill policy trained on ManiUnit segments achieves 78.7% local manipulation success, compared with 49.3% for a task policy trained on complete demonstrations. The trained skills further support complete-task execution on these activities, as coordinating the task and skill policies through a planner raises full-task success from 4.0% to 18.0%.

Skills are a promising way to improve LLM agent capabilities without retraining, while keeping the added procedure reusable and controllable. However, high-quality skills are still largely written by hand. We introduce SkillGen, a multi-agent framework that synthesizes a single auditable skill from trajectories generated by a base agent. The output is a human-readable artifact that can be inspected before use. Rather than merely summarizing trajectories, SkillGen leverages contrastive induction over both successful and failed trajectories to identify reusable success patterns, recurring failure modes, and behaviors that appear in nearby successes but are missing from failures. SkillGen then generates candidate skills and iteratively refines the skill. A key novelty in SkillGen is that we model agent skills as interventions to empirically verify the net effect of skills on the overall performance. Specifically, we compare outcomes on the same instances with and without the skill, so that we account for both repairs (cases where the skill fixes a baseline failure) and regressions (cases where the skill breaks a baseline success). Across a broad range of agents and datasets, SkillGen consistently improves held-out performance, outperforms existing skill-generation baselines, and produces skills that transfer across models.

LLM agents increasingly rely on reusable skills, capability packages that combine instructions, control flow, constraints, and tool calls. In most current agent systems, however, skills are still represented by text-heavy artifacts, including SKILL.md-style documents and structured records whose machine-usable evidence remains embedded largely in natural-language descriptions. This poses a challenge for skill-centered agent systems: managing skill collections and using skills to support agent both require reasoning over invocation interfaces, execution structure, and concrete side effects that are often entangled in a single textual surface. An explicit representation of skill knowledge may therefore help make these artifacts easier for machines to acquire and leverage. Drawing on Memory Organization Packets, Script Theory, and Conceptual Dependency from Schank and Abelson's classical work on linguistic knowledge representation, we introduce what is, to our knowledge, the first structured representation for agent skill artifacts that disentangles skill-level scheduling signals, scene-level execution structure, and logic-level action and resource-use evidence: the Scheduling-Structural-Logical (SSL) representation. We instantiate SSL with an LLM-based normalizer and evaluate it on a corpus of skills in two tasks, Skill Discovery and Risk Assessment, and superiorly outperform the text-only baselines: in Skill Discovery, SSL improves MRR from 0.573 to 0.707; in Risk Assessment, it improves macro F1 from 0.744 to 0.787. These findings reveal that explicit, source-grounded structure makes agent skills easier to search and review. They also suggest that SSL is best understood as a practical step toward more inspectable, reusable, and operationally actionable skill representations for agent systems, rather than as a finished standard or an end-to-end mechanism for managing and using skills.

Teaching robots dexterous manipulation skills, such as tool use, presents a significant challenge. Current approaches can be broadly categorized into two strategies: human teleoperation (for imitation learning) and sim-to-real reinforcement learning. The first approach is difficult as it is hard for humans to produce safe and dexterous motions on a different embodiment without touch feedback. The second RL-based approach struggles with the domain gap and involves highly task-specific reward engineering on complex tasks. Our key insight is that RL is effective at learning low-level motion primitives, while humans excel at providing coarse motion commands for complex, long-horizon tasks. Therefore, the optimal solution might be a combination of both approaches. In this paper, we introduce DexterityGen (DexGen), which uses RL to pretrain large-scale dexterous motion primitives, such as in-hand rotation or translation. We then leverage this learned dataset to train a dexterous foundational controller. In the real world, we use human teleoperation as a prompt to the controller to produce highly dexterous behavior. We evaluate the effectiveness of DexGen in both simulation and real world, demonstrating that it is a general-purpose controller that can realize input dexterous manipulation commands and significantly improves stability by 10-100x measured as duration of holding objects across diverse tasks. Notably, with DexGen we demonstrate unprecedented dexterous skills including diverse object reorientation and dexterous tool use such as pen, syringe, and screwdriver for the first time.

Reusable skill libraries allow large language model (LLM) agents to reuse procedural knowledge across tasks, but they also turn memory access into a challenging retrieval problem. Full-library prompting preserves coverage at high context cost, vector retrieval returns compact neighborhoods but treats skills as independent text, and graph-based retrieval can recover workflow context only when the edges that carry relevance are reliable. We propose CaSKG, a counterfactual-causal skill graph framework that calibrates procedural relations before retrieval. CaSKG first builds a high-recall directed candidate graph from semantic, lexical, input/output, and structural evidence, with repair evidence and an optional LLM judge further refining candidate scores. It then applies direction-conditioned textual counterfactual probes that remove, substitute, and reorder skill pairs, aggregates the evidence with Bayesian smoothing, and publishes a state-filtered weighted graph for task-conditioned expansion. The graph is constructed offline and used without changing the downstream agent policy or task interface. Across six LLM backbones on ALFWorld ID-140 and ScienceWorld U211, CaSKG achieves the highest task score in all twelve combinations of model and benchmark. Relative to Graph-of-Skills (GoS), it improves the six-model macro-average ScienceWorld score from 72.62 to 80.50 and ALFWorld success from 80.01\% to 86.79\%, while reducing mean environment steps on both benchmarks. Qualitative and ablation analyses further show that calibrated edges help retrieval preserve prerequisites, state-changing actions, verification routines, and final completion steps. These results position edge-confidence calibration as an effective route to compact and executable skill retrieval at scaleCode is available at: https://github.com/ZhiyuanLi218/Caskg .

Skilled robotic manipulation benefits from complex synergies between non-prehensile (e.g. pushing) and prehensile (e.g. grasping) actions: pushing can help rearrange cluttered objects to make space for arms and fingers; likewise, grasping can help displace objects to make pushing movements more precise and collision-free. In this work, we demonstrate that it is possible to discover and learn these synergies from scratch through model-free deep reinforcement learning. Our method involves training two fully convolutional networks that map from visual observations to actions: one infers the utility of pushes for a dense pixel-wise sampling of end effector orientations and locations, while the other does the same for grasping. Both networks are trained jointly in a Q-learning framework and are entirely self-supervised by trial and error, where rewards are provided from successful grasps. In this way, our policy learns pushing motions that enable future grasps, while learning grasps that can leverage past pushes. During picking experiments in both simulation and real-world scenarios, we find that our system quickly learns complex behaviors amid challenging cases of clutter, and achieves better grasping success rates and picking efficiencies than baseline alternatives after only a few hours of training. We further demonstrate that our method is capable of generalizing to novel objects. Qualitative results (videos), code, pre-trained models, and simulation environments are available at http://vpg.cs.princeton.edu

How can we imbue robots with the ability to manipulate objects precisely but also to reason about them in terms of abstract concepts? Recent works in manipulation have shown that end-to-end networks can learn dexterous skills that require precise spatial reasoning, but these methods often fail to generalize to new goals or quickly learn transferable concepts across tasks. In parallel, there has been great progress in learning generalizable semantic representations for vision and language by training on large-scale internet data, however these representations lack the spatial understanding necessary for fine-grained manipulation. To this end, we propose a framework that combines the best of both worlds: a two-stream architecture with semantic and spatial pathways for vision-based manipulation. Specifically, we present CLIPort, a language-conditioned imitation-learning agent that combines the broad semantic understanding (what) of CLIP [1] with the spatial precision (where) of Transporter [2]. Our end-to-end framework is capable of solving a variety of language-specified tabletop tasks from packing unseen objects to folding cloths, all without any explicit representations of object poses, instance segmentations, memory, symbolic states, or syntactic structures. Experiments in simulated and real-world settings show that our approach is data efficient in few-shot settings and generalizes effectively to seen and unseen semantic concepts. We even learn one multi-task policy for 10 simulated and 9 real-world tasks that is better or comparable to single-task policies.

Product data scientists often ask LLM-based agents to help with recurring execution tasks such as cleaning data, writing SQL, choosing statistical tests, and formatting results. Reusable skill files are meant to avoid prompting from scratch by packaging guidance for a task family. Expert-written skills can encode high-quality guidance, but writing and maintaining them across many data-science task families creates a manual bottleneck. We ask whether LLM-generated skills offer a useful low-curation alternative: do they improve performance over the task prompt alone? We test this question across four lifecycle stages: data preparation, data extraction, statistical analysis, and reporting, using one generated skill per stage. We find no reliable improvement from full generated skills over No-Skill prompting. We then ask whether any part of the skill is useful by ablating different skill components. The main ablation covers 56 tasks, nine model configurations, and three providers, yielding 7,560 runs. Compared with prompting using the task alone, neither the full generated skill nor any ablated skill variant significantly improves performance; all p-values are at least 0.396, and the total spread across variants is only 1.2 pp. A supplemental token-matched control adds 1,512 runs and finds that Full skills perform similarly to task-irrelevant skill-formatted content. The results caution against using one LLM-generated skill per data-science workflow as a default single-shot prompting strategy.

Skills are becoming a reusable operational layer for LLM agents, encoding SOPs, domain rules, tool workflows, scripts, and validation routines. In realistic skill repositories, overlapping skills make reliable skill-use difficult. Final verifier success is too coarse for both evaluation and training, since an agent may pass through trial and error while selecting distractor skills, skipping required steps, composing workflows incorrectly or omitting final checks. We introduce SkillCoach, a self-evolving rubric framework for evaluating and enhancing agentic skill-use. SkillCoach derives skill-grounded process rubrics from real rollouts and evaluates trajectories along four dimensions: skill selection, skill following, skill composition, and skill-grounded reflection. It keeps the external verifier as a separate outcome signal, allowing process quality to be distinguished from accidental task success. The evolved rubrics further serve as process supervision for selecting high-quality training trajectories. Experiments show that evolved rubrics substantially improve evaluation quality, expose failures hidden by final accuracy, and provide stronger supervision signals than outcome-only filtering for enhancing agentic skill-use.

Agent skills, which consist of reusable strategies that guide agent reasoning and action, have shown strong potential for improving model capability at inference time. However, current skill construction methods treat the problem as one-shot extraction, overlooking a fundamental tension: a skill tailored to the specific task fails to transfer, while the abstracted skill often provides insufficient guidance. We attribute this fragility to the absence of explicit mechanisms for skill specification and generalization. To address this gap, we introduce SkillComposer, a framework that decomposes skill construction into three learnable operations: create, improve, and merge. Trained via systematic rejection sampling recipe, SkillComposer enables language models to self-evolve skills at inference time and supports three deployment modes: offline for building generalized libraries, online for task-specific refinement, and hybrid for combining both. Comprehensive experiments on τ^2-Bench, LiveCodeBench v6, and AppWorld show that SkillComposer consistently outperforms baselines. Our SkillComposer-4B improves a 27B executor by up to +4.5 on agent tasks and +3.4 on code tasks, while generalizing across domains and task types unseen during training. Analysis reveals that merge and improve address orthogonal quality dimensions and that skill composition is a transferable meta-ability, providing a practical recipe for skill-augmented inference.

Precise robot manipulation is critical for fine-grained applications such as chemical and biological experiments, where even small errors (e.g., reagent spillage) can invalidate an entire task. Existing approaches often rely on pre-collected expert demonstrations and train policies via imitation learning (IL) or offline reinforcement learning (RL). However, obtaining high-quality demonstrations for precision tasks is difficult and time-consuming, while offline RL commonly suffers from distribution shifts and low data efficiency. We introduce a Role-Model Reinforcement Learning (RM-RL) framework that unifies online and offline training in real-world environments. The key idea is a role-model strategy that automatically generates labels for online training data using approximately optimal actions, eliminating the need for human demonstrations. RM-RL reformulates policy learning as supervised training, reducing instability from distribution mismatch and improving efficiency. A hybrid training scheme further leverages online role-model data for offline reuse, enhancing data efficiency through repeated sampling. Extensive experiments show that RM-RL converges faster and more stably than existing RL methods, yielding significant gains in real-world manipulation: 53% improvement in translation accuracy and 20% in rotation accuracy. Finally, we demonstrate the successful execution of a challenging task, precisely placing a cell plate onto a shelf, highlighting the framework's effectiveness where prior methods fail.

Large language model (LLM)-based agents that reason, plan, and act through tools, memory, and structured interaction are emerging as a promising paradigm for automating complex workflows. Recent systems such as OpenClaw and Claude Code exemplify a broader shift from passive response generation to action-oriented task execution. Yet as agents move toward open-ended, real-world deployment, relying on from-scratch reasoning and low-level tool calls for every task become increasingly inefficient, error-prone, and hard to maintain. This survey examines this challenge through the lens of agent skills, which we define as reusable procedural artifacts that coordinate tools, memory, and runtime context under task-specific constraints. Under this view, agents and skills play complementary roles: agents handle high-level reasoning and planning, while skills form the operational layer that enables reliable, reusable, and composable execution. Skills are therefore central to the scalability, robustness, and maintainability of modern agent systems. We organize the literature around four stages of the agent skill lifecycle -- representation, acquisition, retrieval, and evolution -- and review representative methods, ecosystem resources, and application settings across each stage. We conclude by discussing open challenges in quality control, interoperability, safe updating, and long-term capability management. All related resources, including research papers, open-source data, and projects, are collected for the community in blue{https://github.com/JayLZhou/Awesome-Agent-Skills}.

Agents increasingly rely on reusable skills to encode task knowledge, tool-use procedures, and validation rules. Existing skill self-evolution methods primarily revise skills using execution trajectories collected from current tasks, leaving the evolution knowledge accumulated in public skill version histories largely untapped. Our pilot study reveals a clear complementarity between the two sources: public skill changes provide reusable evolution priors, whereas trajectories provide evidence grounded in the current task. Motivated by this, we propose VCE-Skill, which distills noisy and implementation-specific public skill changes into reusable, structured version-change experience and adaptively fuses it with trajectory-derived proposals from the base evolver, thereby exploiting external experience while retaining task-specific evidence. Extensive experiments demonstrate that VCE-Skill improves skill self-evolution, increasing mean scores by 3.20--4.98 points; transfer experiments further show that the resulting skills achieve stronger cross-model transfer performance. Our work highlights public skill version changes as a previously underexplored yet effective source of prior knowledge and advances trajectory-driven skill self-evolution.

Agent skills, structured packages of procedural knowledge and executable resources that agents dynamically load at inference time, have become a reliable mechanism for augmenting LLM agents. Yet inference-time skill augmentation is fundamentally limited: retrieval noise introduces irrelevant guidance, injected skill content imposes substantial token overhead, and the model never truly acquires the knowledge it merely follows. We ask whether skills can instead be internalized into model parameters, enabling zero-shot autonomous behavior without any runtime skill retrieval. We introduce SKILL0, an in-context reinforcement learning framework designed for skill internalization. SKILL0 introduces a training-time curriculum that begins with full skill context and progressively withdraws it. Skills are grouped offline by category and rendered with interaction history into a compact visual context, teaching he model tool invocation and multi-turn task completion. A Dynamic Curriculum then evaluates each skill file's on-policy helpfulness, retaining only those from which the current policy still benefits within a linearly decaying budget, until the agent operates in a fully zero-shot setting. Extensive agentic experiments demonstrate that SKILL0 achieves substantial improvements over the standard RL baseline (+9.7\% for ALFWorld and +6.6\% for Search-QA), while maintaining a highly efficient context of fewer than 0.5k tokens per step. Our code is available at https://github.com/ZJU-REAL/SkillZero.

Hand-object motion-capture (MoCap) repositories offer large-scale, contact-rich demonstrations and hold promise for scaling dexterous robotic manipulation. Yet demonstration inaccuracies and embodiment gaps between human and robot hands limit the straightforward use of these data. Existing methods adopt a three-stage workflow, including retargeting, tracking, and residual correction, which often leaves demonstrations underused and compound errors across stages. We introduce Dexplore, a unified single-loop optimization that jointly performs retargeting and tracking to learn robot control policies directly from MoCap at scale. Rather than treating demonstrations as ground truth, we use them as soft guidance. From raw trajectories, we derive adaptive spatial scopes, and train with reinforcement learning to keep the policy in-scope while minimizing control effort and accomplishing the task. This unified formulation preserves demonstration intent, enables robot-specific strategies to emerge, improves robustness to noise, and scales to large demonstration corpora. We distill the scaled tracking policy into a vision-based, skill-conditioned generative controller that encodes diverse manipulation skills in a rich latent representation, supporting generalization across objects and real-world deployment. Taken together, these contributions position Dexplore as a principled bridge that transforms imperfect demonstrations into effective training signals for dexterous manipulation.

Transforming complex actions into discrete skill abstractions has demonstrated strong potential for robotic manipulation. Existing approaches mainly leverage latent variable models, e.g., VQ-VAE, to learn skill abstractions through learned vectors (codebooks), while they suffer from codebook collapse and modeling the causal relationship between learned skills. To address these limitations, we present Skill Training with Augmented Rotation (STAR), a framework that advances both skill learning and composition to complete complex behaviors. Specifically, to prevent codebook collapse, we devise rotation-augmented residual skill quantization (RaRSQ). It encodes relative angles between encoder outputs into the gradient flow by rotation-based gradient mechanism. Points within the same skill code are forced to be either pushed apart or pulled closer together depending on gradient directions. Further, to capture the causal relationship between skills, we present causal skill transformer (CST) which explicitly models dependencies between skill representations through an autoregressive mechanism for coherent action generation. Extensive experiments demonstrate the superiority of STAR on both LIBERO benchmark and realworld tasks, with around 12\% improvement over the baselines.

Agent skills are reusable procedural artifacts that extend language agents with specialized workflows, tool conventions, and domain behaviors at inference time. However, creating reliable skills still depends largely on human authorship, model priors, or execution traces. These sources are often unavailable for unfamiliar tasks, suggesting the need to create skills from open-world materials. In this paper, we study open-world skill creation: given an underspecified skill brief and a source-access specification, a creator must discover behavior-relevant requirements omitted by the brief and determine how broadly each source-derived procedure is justified. We propose SkillAlchemy, an admission-centered framework for source-grounded skill creation. SkillAlchemy identifies implicit requirements through contrastive evidence, admits candidate procedures based on evidence-supported scope, and compiles the admitted content into a grammar-guided skill package. Extensive experiments across 87 SkillsBench v1.1 tasks demonstrate that SkillAlchemy improves pass rate over no-skill execution by 19.9 percentage points and the strongest automated baseline by 8.6 percentage points, while achieving performance comparable to human-curated skills.

Large language model (LLM) agents rely on reusable skills to solve complex tasks. However, existing skill creation approaches treat skills as isolated and static artifacts, limiting their reusability, reliability, and long-term improvement. We propose MUSE-Autoskill Agent (Memory-Utilizing Skill Evolution), a skill-centric agent framework that lets agents continuously improve their task-solving capability by creating, reusing, and refining skills under a unified lifecycle (creation, memory, management, evaluation, and refinement). Our framework enables agents to create skills on demand, store and reuse them across tasks, organize and select them efficiently, and evaluate them through unit tests and runtime feedback for continuous refinement. We further introduce skill-level memory that accumulates experience for each skill across tasks, enabling more effective reuse and adaptation over time. Experiments on SkillsBench provide initial evidence that lifecycle-managed skills can improve task success, efficiency, reuse, and cross-agent transfer, highlighting the importance of treating skills as long-lived, experience-aware, and testable assets.

Manipulating objects to achieve desired goal states is a basic but important skill for dexterous manipulation. Human hand motions demonstrate proficient manipulation capability, providing valuable data for training robots with multi-finger hands. Despite this potential, substantial challenges arise due to the embodiment gap between human and robot hands. In this work, we introduce a hierarchical policy learning framework that uses human hand motion data for training object-centric dexterous robot manipulation. At the core of our method is a high-level trajectory generative model, learned with a large-scale human hand motion capture dataset, to synthesize human-like wrist motions conditioned on the desired object goal states. Guided by the generated wrist motions, deep reinforcement learning is further used to train a low-level finger controller that is grounded in the robot's embodiment to physically interact with the object to achieve the goal. Through extensive evaluation across 10 household objects, our approach not only demonstrates superior performance but also showcases generalization capability to novel object geometries and goal states. Furthermore, we transfer the learned policies from simulation to a real-world bimanual dexterous robot system, further demonstrating its applicability in real-world scenarios. Project website: https://cypypccpy.github.io/obj-dex.github.io/.

Agent skills, SKILL.md files that package reusable procedural knowledge for an LLM agent, are a popular mechanism for extending agent capabilities. Public repositories now host them in large and growing numbers, yet these artifacts are fragmented, redundant, and uneven in quality, and their value in practice is unclear. A core question remains open, namely how to consolidate this open-source SKILL.md ecosystem into a single usable corpus, and what bounds its benefit on real-world agent tasks. We present SkillCorpus, a framework that aggregates, curates, matches, and evaluates the open skill ecosystem at scale. It filters ~821,000 crawled skills through a multi-stage pipeline into 96,401 skills organised by a 16-class taxonomy and three quality facets (utility, robustness, safety), and pairs them with a fine-tuned retrieval-and-selection stack that matches task-relevant skills. We evaluate end-to-end across three benchmarks (SkillsBench, GDPVal, QwenClawBench), two harnesses, and two open backbones with a frontier robustness check. Integrating SkillCorpus yields consistent gains across all three benchmarks, largest on SkillsBench (+7.5 pp). An operational analysis traces the gains to a coverage boundary and a harness boundary. SkillCorpus is, to our knowledge, the first end-to-end account of when a curated, retrieval-served community corpus improves real agent tasks, and where it does not. The dataset, models, and code will be released upon acceptance.

We introduce ReWiND, a framework for learning robot manipulation tasks solely from language instructions without per-task demonstrations. Standard reinforcement learning (RL) and imitation learning methods require expert supervision through human-designed reward functions or demonstrations for every new task. In contrast, ReWiND starts from a small demonstration dataset to learn: (1) a data-efficient, language-conditioned reward function that labels the dataset with rewards, and (2) a language-conditioned policy pre-trained with offline RL using these rewards. Given an unseen task variation, ReWiND fine-tunes the pre-trained policy using the learned reward function, requiring minimal online interaction. We show that ReWiND's reward model generalizes effectively to unseen tasks, outperforming baselines by up to 2.4x in reward generalization and policy alignment metrics. Finally, we demonstrate that ReWiND enables sample-efficient adaptation to new tasks, beating baselines by 2x in simulation and improving real-world pretrained bimanual policies by 5x, taking a step towards scalable, real-world robot learning. See website at https://rewind-reward.github.io/.

Skill-augmented reinforcement learning improves language agents by storing reusable procedural knowledge acquired from past experience. Existing methods typically use strong language models to analyze trajectories, generate skills, and update a retrievable skill bank during online training. However, they rarely assess whether a newly generated skill is useful before it is stored and reused. We find that this assumption is unreliable: even skills generated by proprietary frontier LLMs exhibit highly mixed utility, with many providing little benefit or even degrading performance. Once such skills enter the bank, their effects are difficult to identify, because subsequent rollout feedback is delayed and usually reflects the combined effect of multiple retrieved skills rather than the marginal contribution of any individual skill. We propose an online reinforcement learning framework for pre-storage skill validation. The framework estimates whether a candidate skill contributes useful information beyond the skills already retrieved for the current task. It uses the standard rollout budget to form two matched groups under the same task and retrieval context: base rollouts conditioned on the currently retrieved skills, and skill-augmented rollouts conditioned on the same skills plus one candidate skill induced from the base trajectories. The reward gap between these two groups estimates the candidate skill's context-dependent marginal utility, enabling the framework to promote useful skills while filtering ineffective or harmful ones without additional rollout overhead. The framework further uses this marginal-utility signal to train the policy itself as a skill generator, reducing reliance on repeated calls to proprietary models. The learned skill-generation likelihood serves as a context-dependent score for retrieval-time reranking and outdated-skill pruning as the policy evolves.

Robotic manipulation remains a core challenge in robotics, particularly for contact-rich tasks such as industrial assembly and disassembly. Existing datasets have significantly advanced learning in manipulation but are primarily focused on simpler tasks like object rearrangement, falling short of capturing the complexity and physical dynamics involved in assembly and disassembly. To bridge this gap, we present REASSEMBLE (Robotic assEmbly disASSEMBLy datasEt), a new dataset designed specifically for contact-rich manipulation tasks. Built around the NIST Assembly Task Board 1 benchmark, REASSEMBLE includes four actions (pick, insert, remove, and place) involving 17 objects. The dataset contains 4,551 demonstrations, of which 4,035 were successful, spanning a total of 781 minutes. Our dataset features multi-modal sensor data, including event cameras, force-torque sensors, microphones, and multi-view RGB cameras. This diverse dataset supports research in areas such as learning contact-rich manipulation, task condition identification, action segmentation, and task inversion learning. The REASSEMBLE will be a valuable resource for advancing robotic manipulation in complex, real-world scenarios. The dataset is publicly available on our project website: https://tuwien-asl.github.io/REASSEMBLE_page/.

Many recent advances in robotic manipulation have come through imitation learning, yet these rely largely on mimicking a particularly hard-to-acquire form of demonstrations: those collected on the same robot in the same room with the same objects as the trained policy must handle at test time. In contrast, large pre-recorded human video datasets demonstrating manipulation skills in-the-wild already exist, which contain valuable information for robots. Is it possible to distill a repository of useful robotic skill policies out of such data without any additional requirements on robot-specific demonstrations or exploration? We present the first such system ZeroMimic, that generates immediately deployable image goal-conditioned skill policies for several common categories of manipulation tasks (opening, closing, pouring, pick&place, cutting, and stirring) each capable of acting upon diverse objects and across diverse unseen task setups. ZeroMimic is carefully designed to exploit recent advances in semantic and geometric visual understanding of human videos, together with modern grasp affordance detectors and imitation policy classes. After training ZeroMimic on the popular EpicKitchens dataset of ego-centric human videos, we evaluate its out-of-the-box performance in varied real-world and simulated kitchen settings with two different robot embodiments, demonstrating its impressive abilities to handle these varied tasks. To enable plug-and-play reuse of ZeroMimic policies on other task setups and robots, we release software and policy checkpoints of our skill policies.

Large language model agents often encounter related yet distinct tasks that share reusable solution patterns. Yet standard agentic reinforcement learning treats tasks as independent episodes, while existing approaches to skill learning either focus on repeated attempts of one task or use pipelines with multiple stages that entangle extraction, retrieval, and execution. We introduce SkillRise, a unified reinforcement learning framework for learning skills across tasks. SkillRise organizes related instances into progressively challenging sequences and uses a single policy to alternate between task solving and curating an evolving skill document passed directly to the next task. Decoupled credit assignment across tasks supervises solving with the current task outcome and curation with discounted downstream outcomes. Experiments on ALFWorld, WebShop, and ScienceWorld show that SkillRise achieves the strongest Pass@1 performance among the compared methods, with gains over the strongest baseline ranging from 2.3 to 8.5 percentage points. Although trained across distinct tasks, its learned curation policy remains effective for repeated attempts on the same task. Further analysis reveals scaling at test time across tasks: performance improves with longer sequences of related tasks even when each task is attempted only once. This trend suggests that SkillRise reuses transferable skills across tasks rather than benefiting from repeated sampling of the same task. SkillRise further retains strong performance while substantially reducing the runtime overhead of skill learning pipelines with multiple stages. Together, these results provide a simple and efficient training paradigm for LLM agents to extract, refine, and reuse transferable skills across tasks.

Dexterous hands enable concurrent prehensile and nonprehensile manipulation, such as holding one object while interacting with another, a capability essential for everyday tasks yet underexplored in robotics. Learning such long-horizon, contact-rich multi-stage behaviors is challenging because demonstrations are expensive to collect and end-to-end policies require substantial data to generalize across varied object geometries and placements. We present DexMulti, a sample-efficient approach for real-world dexterous multi-task manipulation that decomposes demonstrations into object-centric skills with well-defined temporal boundaries. Rather than learning monolithic policies, our method retrieves demonstrated skills based on current object geometry, aligns them to the observed object state using an uncertainty-aware estimator that tracks centroid and yaw, and executes them via a retrieve-align-execute paradigm. We evaluate on three multi-stage tasks requiring concurrent manipulation (Grasp + Pull, Grasp + Open, and Grasp + Grasp) across two dexterous hands (Allegro and LEAP) in over 1,000 real-world trials. Our approach achieves an average success rate of 66% on training objects with only 3-4 demonstrations per object, outperforming diffusion policy baselines by 2-3x while requiring far fewer demonstrations. Results demonstrate robust generalization to held-out objects and spatial variations up to +/-25 cm.

Vision-Language-Action (VLA) models have demonstrated strong capabilities in robotic manipulation by integrating visual perception, language understanding, and robot action generation. Existing research has primarily focused on improving model architectures, training strategies, and dataset scale, while little attention has been paid to how demonstrations are collected and organized. We identify demonstration organization as a fundamental yet overlooked aspect of imitation learning, as it directly affects policy learning efficiency, training stability, and policy generalization. To address this gap, we propose a simple-to-complex structured demonstration collection strategy for VLA learning using a dual-arm robotic platform. Our approach systematically organizes data through three general principles: (i) decomposing complex manipulation tasks into progressively learnable sub-skills, (ii) standardizing the interaction environment to reduce unnecessary variability, and (iii) organizing demonstrations according to progressively increasing task complexity. This structured design enables VLA models to first acquire fundamental manipulation skills before learning increasingly complex task compositions, facilitating more effective learning of long-horizon manipulation tasks. We evaluate the proposed strategy on two representative robotic manipulation tasks: block grasping and sorting, and towel folding. Experimental results show consistent improvements in task success rate and training stability compared with the baseline method of directly collecting end-to-end complete task trajectories. These findings highlight demonstration organization as a previously underexplored but important factor in VLA learning and provide practical insights into efficient skill acquisition, scalable dataset construction, and long-horizon robotic manipulation.

We present Universal Manipulation Interface (UMI) -- a data collection and policy learning framework that allows direct skill transfer from in-the-wild human demonstrations to deployable robot policies. UMI employs hand-held grippers coupled with careful interface design to enable portable, low-cost, and information-rich data collection for challenging bimanual and dynamic manipulation demonstrations. To facilitate deployable policy learning, UMI incorporates a carefully designed policy interface with inference-time latency matching and a relative-trajectory action representation. The resulting learned policies are hardware-agnostic and deployable across multiple robot platforms. Equipped with these features, UMI framework unlocks new robot manipulation capabilities, allowing zero-shot generalizable dynamic, bimanual, precise, and long-horizon behaviors, by only changing the training data for each task. We demonstrate UMI's versatility and efficacy with comprehensive real-world experiments, where policies learned via UMI zero-shot generalize to novel environments and objects when trained on diverse human demonstrations. UMI's hardware and software system is open-sourced at https://umi-gripper.github.io.

Human demonstrations offer a scalable data source for dexterous manipulation, but transferring them to robot actions remains challenging due to the embodiment gap. Today's retargeting is mostly kinematic, yet manipulation is decided by force, which governs how the hand interacts with the object and how the object moves. In this paper, we present ReForce, a Force-aware Retargeting method that turns human motion and forces into robot actions that reproduce the intended contact. ReForce predicts a residual on the kinematically retargeted action to reach the desired force, using a general force tracker trained on large-scale simulation interactions. It supports both online force-aware teleoperation and offline data translation. In simulation and on real hardware, ReForce achieves lower force-tracking error and stronger multi-finger contact engagement on contact-rich tasks such as paper-cup grasping and tongs manipulation.

HoloBoxing presents a simple recipe for learning humanoid boxing by building on a pretrained whole-body controller. The recipe separates reusable motor skills from task decisions: a compact planner requests future body-point targets, while the frozen controller handles joint-level execution. A learned decoder maps 32-dimensional actions to structured target windows, and measured-state imitation initializes the planner before reinforcement learning. Task learning then refines interaction behavior while reusing the decoder and controller, avoiding the need to relearn whole-body control. This combination keeps task optimization focused on a compact upper policy and supplies an initial behavior before reward-driven exploration. Starting from that available controller, the recipe accounts for about seven minutes of additional training, including reused representation fitting and a single-GPU task run. This excludes controller pretraining, data preparation, evaluation, and search. Simulated boxing experiments and component controls evaluate the resulting behavior and the roles of imitation initialization and the target representation.

In embodied manipulation, Vision Language Action (VLA) models can execute atomic skills, but long-horizon manipulation requires recombining these skills without demonstrations for every skill combination. The full instruction route treats skill chaining as long-horizon imitation. In a controlled study, full instruction training on limited skill combination sequences reaches 40.0% ordered success on covered combinations but only 7.7% on recombination, suggesting memorization of sequence templates rather than robust skill recombination. We introduce Hierarchical Subtask Execution (HSE), a diagnostic framework that exposes skill recombination through a shared modular interface over the planner, trigger, and policy, decomposing long-horizon failures into separable modes. We introduce RoboCombine, a benchmark for skill recombination without combined skill training trajectories, with metrics for ordered success and transition conversion across subtask boundaries. RoboCombine reveals that atomic competence alone does not ensure ordered execution. Failures concentrate at transitions where downstream subtasks launch from handoff states from preceding subtasks rather than canonical atomic starts. We identify this mismatch as the start state gap. To address it, we introduce Pose Robust Task Initialization (PRTI), a lightweight atomic task post-training strategy that broadens start state coverage beyond canonical starts. Under oracle timed HSE on RoboCombine, PRTI reaches 18.16% ordered success, compared with 4.21% under random perturbation and 9.47% under a robot-reset oracle, without combined skill training trajectories. These results show that combinatorial generalization requires handoff robust atomic skills that convert first stage progress into reliable downstream execution, not merely decomposition into known subtasks. Code: https://github.com/AutoLab-SAI-SJTU/RoboCombine.

Manipulating articulated tools, such as tweezers or scissors, has rarely been explored in previous research. Unlike rigid tools, articulated tools change their shape dynamically, creating unique challenges for dexterous robotic hands. In this work, we present a hierarchical, goal-conditioned reinforcement learning (GCRL) framework to improve the manipulation capabilities of anthropomorphic robotic hands using articulated tools. Our framework comprises two policy layers: (1) a low-level policy that enables the dexterous hand to manipulate the tool into various configurations for objects of different sizes, and (2) a high-level policy that defines the tool's goal state and controls the robotic arm for object-picking tasks. We employ an encoder, trained on synthetic pointclouds, to estimate the tool's affordance states--specifically, how different tool configurations (e.g., tweezer opening angles) enable grasping of objects of varying sizes--from input point clouds, thereby enabling precise tool manipulation. We also utilize a privilege-informed heuristic policy to generate replay buffer, improving the training efficiency of the high-level policy. We validate our approach through real-world experiments, showing that the robot can effectively manipulate a tweezer-like tool to grasp objects of diverse shapes and sizes with a 70.8 % success rate. This study highlights the potential of RL to advance dexterous robotic manipulation of articulated tools.

Current AI agents can flexibly invoke tools and execute complex tasks, yet their long-term advancement is hindered by the lack of systematic accumulation and transfer of skills. Without a unified mechanism for skill consolidation, agents frequently ``reinvent the wheel'', rediscovering solutions in isolated contexts without leveraging prior strategies. To overcome this limitation, we introduce SkillNet, an open infrastructure designed to create, evaluate, and organize AI skills at scale. SkillNet structures skills within a unified ontology that supports creating skills from heterogeneous sources, establishing rich relational connections, and performing multi-dimensional evaluation across Safety, Completeness, Executability, Maintainability, and Cost-awareness. Our infrastructure integrates a repository of over 200,000 skills, an interactive platform, and a versatile Python toolkit. Experimental evaluations on ALFWorld, WebShop, and ScienceWorld demonstrate that SkillNet significantly enhances agent performance, improving average rewards by 40% and reducing execution steps by 30% across multiple backbone models. By formalizing skills as evolving, composable assets, SkillNet provides a robust foundation for agents to move from transient experience to durable mastery.

Humans are remarkably efficient at learning tasks from demonstrations, but today's imitation learning methods for robot manipulation often require hundreds or thousands of demonstrations per task. We investigate two fundamental priors for improving learning efficiency: decomposing manipulation trajectories into sequential alignment and interaction phases, and retrieval-based generalisation. Through 3,450 real-world rollouts, we systematically study this decomposition. We compare different design choices for the alignment and interaction phases, and examine generalisation and scaling trends relative to today's dominant paradigm of behavioural cloning with a single-phase monolithic policy. In the few-demonstrations-per-task regime (<10 demonstrations), decomposition achieves an order of magnitude improvement in data efficiency over single-phase learning, with retrieval consistently outperforming behavioural cloning for both alignment and interaction. Building on these insights, we develop Multi-Task Trajectory Transfer (MT3), an imitation learning method based on decomposition and retrieval. MT3 learns everyday manipulation tasks from as little as a single demonstration each, whilst also generalising to novel object instances. This efficiency enables us to teach a robot 1,000 distinct everyday tasks in under 24 hours of human demonstrator time. Through 2,200 additional real-world rollouts, we reveal MT3's capabilities and limitations across different task families. Videos of our experiments can be found on at https://www.robot-learning.uk/learning-1000-tasks.

Agent skills have become an important mechanism for equipping language-model agents with reusable procedural knowledge. However, providing skills alone does not guarantee that current models can effectively identify, apply, and coordinate them. To improve skill-use capabilities, we introduce SKT, a verified data synthesis pipeline that constructs skill-grounded tasks and executable trajectories from large collections of agent skills. SKT selects suitable single-skill and multi-skill configurations, synthesizes tasks through rule-based and agent-based verification with feedback-guided repair, and retains only successful trajectories that substantially use every required skill. Using 2,000 public skills, SKT produces 4,000 task packages and 27,164 verified trajectories. Based on the same pipeline and a disjoint test pool, we further construct SkillEval, a held-out executable benchmark for evaluating skill use. Experiments across diverse models, benchmarks, and agent harnesses show that supervised fine-tuning on SKT-generated trajectories consistently improves skill-use performance. Verification ablations, cross-harness evaluation, and scaling experiments further demonstrate that these gains depend on high-quality supervision, extend beyond a single agent interface, and increase with broader skill coverage. Together, these results establish verified data synthesis as an effective and scalable approach for skill-use training.

We hand the community HAND, a simple and time-efficient method for teaching robots new manipulation tasks through human hand demonstrations. Instead of relying on task-specific robot demonstrations collected via teleoperation, HAND uses easy-to-provide hand demonstrations to retrieve relevant behaviors from task-agnostic robot play data. Using a visual tracking pipeline, HAND extracts the motion of the human hand from the hand demonstration and retrieves robot sub-trajectories in two stages: first filtering by visual similarity, then retrieving trajectories with similar behaviors to the hand. Fine-tuning a policy on the retrieved data enables real-time learning of tasks in under four minutes, without requiring calibrated cameras or detailed hand pose estimation. Experiments also show that HAND outperforms retrieval baselines by over 2x in average task success rates on real robots. Videos can be found at our project website: https://liralab.usc.edu/handretrieval/.

Computer-Using Agents (CUAs) aim to autonomously operate computer systems to complete real-world tasks. However, existing agentic systems remain difficult to scale and lag behind human performance. A key limitation is the absence of reusable and structured skill abstractions that capture how humans interact with graphical user interfaces and how to leverage these skills. We introduce CUA-Skill, a computer-using agentic skill base that encodes human computer-use knowledge as skills coupled with parameterized execution and composition graphs. CUA-Skill is a large-scale library of carefully engineered skills spanning common Windows applications, serving as a practical infrastructure and tool substrate for scalable, reliable agent development. Built upon this skill base, we construct CUA-Skill Agent, an end-to-end computer-using agent that supports dynamic skill retrieval, argument instantiation, and memory-aware failure recovery. Our results demonstrate that CUA-Skill substantially improves execution success rates and robustness on challenging end-to-end agent benchmarks, establishing a strong foundation for future computer-using agent development. On WindowsAgentArena, CUA-Skill Agent achieves state-of-the-art 57.5% (best of three) successful rate while being significantly more efficient than prior and concurrent approaches. The project page is available at https://microsoft.github.io/cua_skill/.

LLM agents are increasingly expected not only to complete isolated tasks, but also to carry bounded representations of human expertise, judgment, and interaction style. Building such person-grounded agents remains difficult because actionable knowledge associated with a person or role is usually embedded in heterogeneous traces rather than written as clean instructions. Existing memory and persona systems capture fragments of this evidence, while skill frameworks provide portable packaging formats; however, there is no end-to-end workflow for distilling these traces into inspectable, correctable, and agent-usable skills. We present an automated trace-to-skill distillation system for generating person-grounded AI skills via expert knowledge distillation. Given materials from a target person or role, COLLEAGUE.SKILL produces a versioned skill package with two coordinated tracks: a capability track for practices, mental models, and decision heuristics, and a bounded behavior track for communication style, interaction rules, and correction history. The package can be inspected, invoked, updated through natural-language feedback, rolled back, installed across agent hosts, and optionally prepared for controlled distribution. We describe the artifact contract, generation workflow, correction lifecycle, deployment surface, and domain presets implemented in the open-source system. At the time of writing, the public repository has approximately 18.5k GitHub stars; the gallery lists 215 skills from 165 contributors and more than 100k cumulative stars across listed skill cards. The system illustrates how person-grounded skills can be represented as portable, correctable packages rather than opaque prompts or hidden memories.

Modern agent frameworks equip large language models with external skill libraries to solve complex tasks. However, it remains unclear whether these systems can effectively evolve their skills and whether the resulting skills improve task-solving capabilities. To bridge this gap, we introduce ContinualSkillBench, a dynamic evaluation framework for in-context continual skill learning. It covers five representative domains, each containing 100 interconnected subtasks ordered by increasing difficulty and opportunities for cross-task skill reuse. Our experiments show that sequential execution generally improves performance, but the gains vary substantially across models and domains. Moreover, in-context learning performs comparably to explicit skill maintenance on average, suggesting that much of the improvement arises from adaptation to prior context and feedback rather than reusable skill abstraction alone. Explicit skills nevertheless provide selective benefits for tasks requiring reusable procedures or precise outputs. We further find that less capable models tend to accumulate larger, more fragmented collections of task-specific skills. These findings show that current in-context skill evolution mechanisms can support continual adaptation, but still struggle to consistently consolidate experience into robust and transferable skills.

Since intelligence fundamentally relies on efficient skill acquisition (Chollet, 2019), the ability to leverage skills is critical. For LLMs, skills, manually authored or extracted from task trajectories, are textual recipes encoding mature problem-solving experience and are critical to agentic capabilities. Despite widespread deployment, their utility is limited by the model's ability to comprehend and follow skill instructions, especially under complex and long-context scenarios, where key instructions are difficult to locate and adhere to. To address this limitation, we propose ParametricSkills, a framework that can convert free-form textual skills into parameters at test time, enabling context-free skill exploitation. Specifically, we first construct a large-scale, high-quality skill library, and synthesize single-turn and multi-turn skill exploitation trajectories built around these skills with OpenCode. Using these data, we then train a hypernetwork that parameterizes both the skill content and the test-time exploitation methodology by receiving textual skills and converting them into LoRA adapters. Experimental results on six complex software engineering (SWE) subtasks demonstrate that, the proposed ParametricSkills averagely outperforms in-context learning by 6.44 points as judged by DeepSeek-V4-Flash, while also achieving significantly higher BERT Score and F1 score, confirming its effectiveness. Beyond performance, we further find that parametric skills, being inherently accumulative, offer a preliminary yet promising avenue toward test-time continual learning.

Robot learning of manipulation skills is hindered by the scarcity of diverse, unbiased datasets. While curated datasets can help, challenges remain in generalizability and real-world transfer. Meanwhile, large-scale "in-the-wild" video datasets have driven progress in computer vision through self-supervised techniques. Translating this to robotics, recent works have explored learning manipulation skills by passively watching abundant videos sourced online. Showing promising results, such video-based learning paradigms provide scalable supervision while reducing dataset bias. This survey reviews foundations such as video feature representation learning techniques, object affordance understanding, 3D hand/body modeling, and large-scale robot resources, as well as emerging techniques for acquiring robot manipulation skills from uncontrolled video demonstrations. We discuss how learning only from observing large-scale human videos can enhance generalization and sample efficiency for robotic manipulation. The survey summarizes video-based learning approaches, analyses their benefits over standard datasets, survey metrics, and benchmarks, and discusses open challenges and future directions in this nascent domain at the intersection of computer vision, natural language processing, and robot learning.

Retrieval-augmented generation (RAG) enables agents to access external knowledge at inference time, but it primarily retrieves fragmented declarative evidence, leaving agents to repeatedly infer task procedures from passages, manuals, examples, logs, or trajectories. This raises a fundamental question: can skills extracted from external knowledge bases be installed into an agent, enabling it to rapidly approximate domain expertise? In this paper, we propose Anything2Skill, a taxonomy-guided framework that compiles heterogeneous external knowledge into reusable, retrievable, and executable skills for agents. Given a corpus of knowledge records, Anything2Skill first decomposes each record into evidence windows and performs plan-and-expand skill extraction under a skill-tree prior. The extracted candidates are then converted into structured skill contracts that specify invocation conditions, contraindications, action moves, workflow steps, constraints, output specifications, supporting evidence, and confidence scores. To construct a deployable procedural memory, Anything2Skill manages the extracted skills in a persistent SkillBank through taxonomy-aware compilation, registry-level reconciliation, lifecycle tracking, versioned updates, and visible skill-tree projection. At inference time, agents retrieve both task-specific passages from the original knowledge base and relevant procedural skills from the SkillBank, allowing RAG to provide declarative evidence while compiled skills provide reusable procedural guidance. Experiments on qsv and GitHub-CLI show that Anything2Skill combined with RAG achieves 98.85\% and 94.10\% success rates, respectively, substantially outperforming RAG-only agents. These results suggest that compiling latent procedural knowledge into explicit skills is an effective way to extend retrieval-augmented agents from knowledge access toward capability reuse.

Robotic manipulation policies often struggle to generalize to novel objects, limiting their real-world utility. In contrast, cognitive science suggests that children develop generalizable dexterous manipulation skills by mastering a small set of simple toys and then applying that knowledge to more complex items. Inspired by this, we study if similar generalization capabilities can also be achieved by robots. Our results indicate robots can learn generalizable grasping using randomly assembled objects that are composed from just four shape primitives: spheres, cuboids, cylinders, and rings. We show that training on these "toys" enables robust generalization to real-world objects, yielding strong zero-shot performance. Crucially, we find the key to this generalization is an object-centric visual representation induced by our proposed detection pooling mechanism. Evaluated in both simulation and on physical robots, our model achieves a 67% real-world grasping success rate on the YCB dataset, outperforming state-of-the-art approaches that rely on substantially more in-domain data. We further study how zero-shot generalization performance scales by varying the number and diversity of training toys and the demonstrations per toy. We believe this work offers a promising path to scalable and generalizable learning in robotic manipulation. Demonstration videos, code, checkpoints and our dataset are available on our project page: https://lego-grasp.github.io/ .

Learning from experience is critical for building capable large language model (LLM) agents, yet prevailing self-evolving paradigms remain inefficient: agents learn in isolation, repeatedly rediscover similar behaviors from limited experience, resulting in redundant exploration and poor generalization. To address this problem, we propose SkillX, a fully automated framework for constructing a plug-and-play skill knowledge base that can be reused across agents and environments. SkillX operates through a fully automated pipeline built on three synergistic innovations: (i) Multi-Level Skills Design, which distills raw trajectories into three-tiered hierarchy of strategic plans, functional skills, and atomic skills; (ii) Iterative Skills Refinement, which automatically revises skills based on execution feedback to continuously improve library quality; and (iii) Exploratory Skills Expansion, which proactively generates and validates novel skills to expand coverage beyond seed training data. Using a strong backbone agent (GLM-4.6), we automatically build a reusable skill library and evaluate its transferability on challenging long-horizon, user-interactive benchmarks, including AppWorld, BFCL-v3, and τ^2-Bench. Experiments show that SkillKB consistently improves task success and execution efficiency when plugged into weaker base agents, highlighting the importance of structured, hierarchical experience representations for generalizable agent learning. Our code will be publicly available soon at https://github.com/zjunlp/SkillX.

Language models trained on large-scale vision-language data have demonstrated strong potential for embodied agents. Harnessing models through embodied tools use offers a promising alternative to end-to-end vision-language-action systems by combining high-level reasoning with external modules for perception, planning, and control. However, it remains unclear what makes an effective harness for embodied manipulation, and to what extent such a harness can unlock embodied capabilities in a wide range of reasoning models. In this work, we present Guava, a harness framework for embodied tool use developed through systematic exploration of the design space of agent workflows, action spaces, and observation spaces. Our study identifies three key ingredients for effective embodied agents: iterative perception-reasoning-action loops, semantic action abstractions, and multimodal observations. To understand whether these design principles are universal even to small models, we develop an end-to-end training pipeline that distills embodied manipulation capabilities into a 4B open-source model using fewer than 2K trajectories collected entirely in simulation. Experimental results in both simulation and real-world environments show performance comparable to frontier proprietary models while exhibiting strong generalization to unseen objects, novel instructions, and long-horizon tasks. Results suggest that a well-designed harness can serve as a scalable, model-agnostic interface for embodied manipulation, enabling strong emergent embodied capabilities in compact open-source models with minimal training data.

Humans routinely wield tools, swap grasps, and reposition objects within a single hand, seamlessly orchestrating contact transitions that span translation, reorientation, and finger gaiting. Endowing robot dexterous hands with this level of in-hand dexterity through teleoperation requires precise control of object motion via dynamic hand-object contact, yet current teleoperation systems remain far from this capability. To bridge this gap, we take a major step towards human-level dexterous teleoperation by introducing TeleDexter, a hand-object co-tracking controller that maps operator intent into learned, low-level contact execution. The controller is trained on consecutive co-tracking subgoals derived from human reference motions, utilizing a hybrid reward that couples sparse subgoal objectives with dense tracking rewards to enable learning across diverse interaction modalities rather than frame-wise trajectory imitation. The entire pipeline requires only single-stage RL and, with random action masking and domain randomization, transfers zero-shot to the real robot. We evaluate TeleDexter on seven challenging dexterous teleoperation tasks spanning object reorientation and long-horizon tool use across two dexterous hands, achieving a 75% average success rate where all baselines consistently fail. Furthermore, the collected demonstrations successfully train autonomous policies via behavioral cloning, marking a concrete step towards human-level dexterous teleoperation.

Self-evolving agents increasingly convert interaction histories into reusable skills that persist beyond individual tasks. While prior work studies memory and retrieval poisoning, such attacks only affect agents when poisoned records are retrieved as context. We uncover a new and more fundamental risk: poisoned experiences can be transformed by the agent itself into durable behavioral artifacts. We present SkillJack, the first attack that exploits the experience-to-skill pipeline of self-evolving agents. Instead of directly manipulating runtime context, SkillJack hijacks the agent's own learning process to implant malicious behaviors into its reusable skill repertoire. We identify three key properties of this transformation: sanitization whitewashing, where malicious intent is obscured during skill extraction; cross-layer promotion, where transient experiences become persistent capabilities; and persistence isolation, where the attack survives removal of its original source records. We evaluate SkillJack on two representative systems, SkillX and Anything2Skill, using a shared dataset of 150 trajectories across four policy-risk categories. Results show that skill extraction substantially reduces attack detectability: in SkillX, safety detection drops from 98.5\% for poisoned trajectories to 11.4\% for extracted skills, while Anything2Skill shows a similar effect. Meanwhile, the implanted skills remain effective, achieving attack success rates of 56.2\% and 89.2\% on the two systems, respectively. Furthermore, 80.0\% of skill-mediated attacks persist after deleting the original poisoned records, and some skills unintentionally activate on benign queries. Our findings reveal skill evolution as a new attack surface and motivate provenance-aware skill lifecycle protection. Our code is available at https://github.com/Tencent/AI-Infra-Guard/research/skilljack.

Large Language Models (LLMs) increasingly act as agents whose procedural knowledge is stored in reusable skill packages and loaded at inference time. As skill libraries grow, a central challenge is to expose the smallest sufficient executable context under a limited context budget. Existing systems struggle to reuse routines below the whole-skill level, preserve procedural contracts during compression, keep compressed routines executable and expandable, and update the compressed library as skills evolve. These challenges reveal a unit mismatch: skills are retrieved as packages, compressed as text, and converted into execution graphs only after retrieval, whereas reliable reuse requires a contract-bearing procedural unit. We propose SkillZip, an execution-aware procedural abstraction framework that performs contract-preserving compression over section-level graphs. SkillZip rewrites recurring contract-valid motifs into reversible ported macros while preserving boundary signatures, dependency closure, verifier reachability, and source-level expansion. At inference time, it hydrates a compact, dependency-closed context and expands macros only when required. ReZip further integrates new skills and revises risky macros using execution evidence. Comprehensive experiments1 on technical and embodied agent benchmarks show SkillZip consistently outperforms the strongest baseline by up to 12.2 points, while achieving a 3.46x compression ratio with 99.2% dependency preservation and 98.7% verifier reachability. Scaling analyses further confirm robust retrieval across skill libraries ranging from 200 to 100K skills.

Vision-language-action (VLA) models often struggle to generalize to skill combinations absent from their fine-tuning demonstrations, even when every constituent skill has been demonstrated. We focus on a vision shortcut as one failure mode: during fine-tuning, visual observations can serve as a proxy for the instruction, so a policy may execute a demonstrated combination associated with similar observations rather than the instructed combination. This motivates training with counterfactual pairs formed by holding a demonstration observation fixed while changing the instruction to specify an undemonstrated combination. These pairs, however, lack corresponding demonstrated action targets. Crucially, the currently required skill has already been demonstrated, but actions from those executions cannot serve as direct targets because the same skill can require different actions across observations. We propose CRAFT, which transfers supervision from demonstrated executions of the required skill to counterfactual pairs using skill representations that can be reused across executions of the same skill. Across three VLA models and two simulation benchmarks, CRAFT improves success on undemonstrated combinations while maintaining high success on demonstrated ones; it also improves compositional generalization on a real robot. Project website: https://taegeunyang.github.io/craft/

Multifingered grasping is a crucial robotic skill, but current deep-learning grasp planners often struggle to generalize to new objects because they are trained on limited, object-specific datasets. We introduce a fundamentally different approach, grounded in the observation that the gripper and the object share identical surface geometry at their mutual contact points. We propose GOAG: Generative and Object-Agnostic Grasp Planner for Dexterous Robotic Manipulation, a novel deep generative model that learns a compact latent representation of a specific gripper's contact surface distribution, enabling the efficient sampling of valid grasp configurations without relying on object-specific training data. We show that by introducing object features only at inference time, our model can effectively retrieve admissible contact areas that are compatible with the gripper's capabilities. We validate our approach through extensive experiments on established grasp protocols in both simulated and real-world scenarios, demonstrating its effectiveness with different grippers from the literature. Our method delivers state-of-the-art results on the objects from the MultiDex dataset, achieving an average success rate of 86.93%. It offers significantly faster processing when generating numerous grasps, while matching the performance of leading approaches specifically trained on this dataset. Unlike these methods, our approach does not rely on object-specific training data, highlighting the advantages of object-agnostic learning. It effectively addresses the generalization challenges faced by traditional data-driven grasp planners. Code and videos are available on our project website https://cea-list.github.io/goagweb/ .

Agent skills are procedural artifacts that enable LLM agents to execute workflows, verify constraints, and recover from failures. Existing self-evolving methods refine skills using accumulated trajectories. However, they struggle in cold-start settings, where only an initial, imperfect skill is available. Consequently, skill construction defaults to expert authoring or one-shot LLM generation. Expert-authored skills are costly and may not align with how LLM agents actually execute tasks, while one-shot generated skills can be syntactically well formed yet behaviorally weak. To bridge this gap, we propose SkillRevise, an execution-grounded framework designed to iteratively refine these initial skills. SkillRevise diagnoses skill defects from execution evidence, retrieves relevant repair principles from a general memory, and applies execution-anchored edits. By re-executing candidates and measuring empirical utility, it systematically retains the optimal skill version. Evaluated across three benchmarks and five LLMs, SkillRevise substantially outperforms one-shot baselines, improving the base agent's success rate on SkillsBench from 36.05% to 61.63%. Furthermore, the revised skills exhibit strong cross-model transferability, capturing generalized procedural knowledge over model-specific artifacts.

Large language model (LLM) agents increasingly rely on skills, structured documents that specify when to act, which procedure to follow, and which tools are allowed. Existing evaluations mostly judge the quality of a skill or its contribution to task success, leaving unexamined whether an agent can recognize a relevant skill and apply it on its own. We introduce Skill-Use, a benchmark that evaluates skill use under progressive disclosure, where an agent sees only a skill's name and short description and must retrieve the full procedure before following it. Skill-Use separates three facets of skill use. Trigger measures whether the agent invokes the relevant skill, Compliance measures how faithfully it follows the prescribed procedure, and Boundary measures whether it avoids forbidden operations. A Skill-Use (SU) score combines the three and credits execution only after the skill is triggered. Skill-Use pairs 79 real skills with 177 executable tasks across nine domains, each grounded in real files, run in an isolated Docker sandbox, and scored by a trajectory-based rubric. Evaluating eight LLMs under two agent harnesses, we find that reliable skill use remains out of reach, as the strongest configuration reaches an SU of only 0.613. Triggering and procedural compliance fail as independent bottlenecks, and both scores and model rankings shift with the harness, so skill use behaves as a capability conditioned on the harness rather than a fixed property of the model.

A rich representation is key to general robotic manipulation, but existing model architectures require a lot of data to learn it. Unfortunately, ideal robotic manipulation training data, which comes in the form of expert visuomotor demonstrations for a variety of annotated tasks, is scarce. In this work we propose PLEX, a transformer-based architecture that learns from task-agnostic visuomotor trajectories accompanied by a much larger amount of task-conditioned object manipulation videos -- a type of robotics-relevant data available in quantity. The key insight behind PLEX is that the trajectories with observations and actions help induce a latent feature space and train a robot to execute task-agnostic manipulation routines, while a diverse set of video-only demonstrations can efficiently teach the robot how to plan in this feature space for a wide variety of tasks. In contrast to most works on robotic manipulation pretraining, PLEX learns a generalizable sensorimotor multi-task policy, not just an observational representation. We also show that using relative positional encoding in PLEX's transformers further increases its data efficiency when learning from human-collected demonstrations. Experiments showcase \appr's generalization on Meta-World-v2 benchmark and establish state-of-the-art performance in challenging Robosuite environments.

While LLM-based agents excel at planning and executing long action sequences, their execution often remains inconsistent across trials, limiting reliability. Consolidating agent consistency requires distilling trial-error trajectories into reusable skills that preserve task-relevant invariants while discarding trajectory-specific noise. However, in multimodal settings, the key challenge is not only that useful invariants are distributed across vision and language information, but that different modalities support different kinds of reusable skill content: while some skills are verbalizable and interpretable, others reside in perceptual evidence beyond text. Text-only skills may lose perceptual cues, whereas storing text and perception naively introduces redundancy and noise. Existing inference-time methods, such as self-consistency, improve reliability through costly multi-sample decoding, while internalization strategies lack a way to separate verbalizable skill content from residual perceptual information. To address this, we introduce Conditional Multimodal Information Bottleneck (CMIB), a method for multimodal skill construction. CMIB begins with a joint bottleneck over multimodal skills and derives an exact sequential decomposition: (1) a text-stage bottleneck distilling interpretable skill cards, and (2) a conditional multimodal bottleneck compressing only residual information in perception that remains predictive beyond text. Unlike naive two-stream formulations, CMIB explicitly conditions the multimodal latent on the text skill, thus structurally reducing cross-modal redundancy and enabling independent control over textual and perceptual compression. We instantiate CMIB with a variational objective that makes its conditional decomposition tractable to optimize, yielding reusable multimodal skills that improve execution stability without incurring multi-sample inference overhead.

Enabling large language models to utilize real-world tools effectively is crucial for achieving embodied intelligence. Existing approaches to tool learning have either primarily relied on extremely large language models, such as GPT-4, to attain generalized tool-use abilities in a zero-shot manner, or utilized supervised learning to train limited scopes of tools on compact models. However, it remains uncertain whether smaller language models can achieve generalized tool-use abilities without tool-specific training. To address this question, this paper introduces ToolAlpaca, a novel framework designed to automatically generate a diverse tool-use corpus and learn generalized tool-use abilities on compact language models with minimal human intervention. Specifically, ToolAlpaca first automatically creates a highly diversified tool-use corpus by building a multi-agent simulation environment. The corpus contains 3938 tool-use instances from more than 400 real-world tool APIs spanning 50 distinct categories. Subsequently, the constructed corpus is employed to fine-tune compact language models, resulting in two models, namely ToolAlpaca-7B and ToolAlpaca-13B, respectively. Finally, we evaluate the ability of these models to utilize previously unseen tools without specific training. Experimental results demonstrate that ToolAlpaca achieves effective generalized tool-use capabilities comparable to those of extremely large language models like GPT-3.5, demonstrating that learning generalized tool-use ability is feasible for compact language models.

Skill-augmented agents improve sample efficiency by distilling successful trajectories into reusable strategies. Yet most existing approaches remain text-centric, linearizing spatial layouts and action-state correspondences into language that loses critical geometric structure. Recent efforts have begun incorporating visual evidence, but construct and update skills separately from policy optimization, leaving their mutual improvement underexplored. We propose ViSkill, a visual-native skill learning framework that encodes successful interactions as composite visual skill cards directly accessible to VLM agents. Retrieved skills guide both inference and reward shaping, while successful trajectories are distilled back into the library, forming a closed feedback loop in which skill accumulation and policy improvement reinforce each other. An optional cold-start mechanism further accelerates early-stage learning. Evaluated on Sokoban, FrozenLake, and PrimitiveSkill, ViSkill achieves an overall success rate of 0.89, rising to 0.91 with cold-start initialization, outperforming all evaluated proprietary and open-source baselines while converging faster than standard PPO. Our code is available at https://github.com/ZJU-REAL/ViSkill.

We present an approach to learn general robot manipulation priors from 3D hand-object interaction trajectories. We build a framework to use in-the-wild videos to generate sensorimotor robot trajectories. We do so by lifting both the human hand and the manipulated object in a shared 3D space and retargeting human motions to robot actions. Generative modeling on this data gives us a task-agnostic base policy. This policy captures a general yet flexible manipulation prior. We empirically demonstrate that finetuning this policy, with both reinforcement learning (RL) and behavior cloning (BC), enables sample-efficient adaptation to downstream tasks and simultaneously improves robustness and generalizability compared to prior approaches. Qualitative experiments are available at: https://hgaurav2k.github.io/hop/.

Behavior cloning (BC) currently stands as a dominant paradigm for learning real-world visual manipulation. However, in tasks that require locally corrective behaviors like multi-part assembly, learning robust policies purely from human demonstrations remains challenging. Reinforcement learning (RL) can mitigate these limitations by allowing policies to acquire locally corrective behaviors through task reward supervision and exploration. This paper explores the use of RL fine-tuning to improve upon BC-trained policies in precise manipulation tasks. We analyze and overcome technical challenges associated with using RL to directly train policy networks that incorporate modern architectural components like diffusion models and action chunking. We propose training residual policies on top of frozen BC-trained diffusion models using standard policy gradient methods and sparse rewards, an approach we call ResiP (Residual for Precise manipulation). Our experimental results demonstrate that this residual learning framework can significantly improve success rates beyond the base BC-trained models in high-precision assembly tasks by learning corrective actions. We also show that by combining ResiP with teacher-student distillation and visual domain randomization, our method can enable learning real-world policies for robotic assembly directly from RGB images. Find videos and code at https://residual-assembly.github.io.

Humans demonstrate remarkable skill in transferring manipulation abilities across objects of varying shapes, poses, and appearances, a capability rooted in their understanding of semantic correspondences between different instances. To equip robots with a similar high-level comprehension, we present SparseDFF, a novel DFF for 3D scenes utilizing large 2D vision models to extract semantic features from sparse RGBD images, a domain where research is limited despite its relevance to many tasks with fixed-camera setups. SparseDFF generates view-consistent 3D DFFs, enabling efficient one-shot learning of dexterous manipulations by mapping image features to a 3D point cloud. Central to SparseDFF is a feature refinement network, optimized with a contrastive loss between views and a point-pruning mechanism for feature continuity. This facilitates the minimization of feature discrepancies w.r.t. end-effector parameters, bridging demonstrations and target manipulations. Validated in real-world scenarios with a dexterous hand, SparseDFF proves effective in manipulating both rigid and deformable objects, demonstrating significant generalization capabilities across object and scene variations.

General-purpose agents can plan, use tools, and revise their behavior from feedback, but it remains unclear whether these capabilities transfer from digital environments to embodied manipulation. To investigate this question, we introduce LIBERO-Agent, an agent-native benchmark for evaluating these agents in robot manipulation tasks. Rather than asking agents to submit task-level Python control programs or operate through high-level robot skills, LIBERO-Agent provides an interactive robotic environment where agents can select which observations to inspect, process them with their own tools, and issue native action commands. LIBERO-Agent integrates 200 tasks into a common interaction framework and provides a 30-task primary suite that separates perception, short-horizon execution, and long-horizon composition. Results reveal a pronounced reliability gap: while agents perform well on perception and easy short-horizon tasks, their performance degrades substantially on hard short-horizon and long-horizon tasks. Richer observations improve short-horizon manipulation, while demonstration benefits depend on the agent and format. Among these agents, GPT-6 Astra achieves the strongest overall performance. Further analysis shows its major advantage lies in mechanism interaction, especially when sustained physical contact is needed, while its remaining failures stem from cross-stage interference and geometric errors.

Learning manipulation skills from human demonstration videos presents a promising yet challenging problem, primarily due to the significant embodiment gap between human body and robot manipulators. Existing methods rely on paired datasets or hand-crafted rewards, which limit scalability and generalization. We propose TrajSkill, a framework for Trajectory Conditioned Cross-embodiment Skill Transfer, enabling robots to acquire manipulation skills directly from human demonstration videos. Our key insight is to represent human motions as sparse optical flow trajectories, which serve as embodiment-agnostic motion cues by removing morphological variations while preserving essential dynamics. Conditioned on these trajectories together with visual and textual inputs, TrajSkill jointly synthesizes temporally consistent robot manipulation videos and translates them into executable actions, thereby achieving cross-embodiment skill transfer. Extensive experiments are conducted, and the results on simulation data (MetaWorld) show that TrajSkill reduces FVD by 39.6\% and KVD by 36.6\% compared with the state-of-the-art, and improves cross-embodiment success rate by up to 16.7\%. Real-robot experiments in kitchen manipulation tasks further validate the effectiveness of our approach, demonstrating practical human-to-robot skill transfer across embodiments.

This study explores the utility of various internet data sources to select among a set of template robot behaviors to perform skills. Learning contact-rich skills involving tool use from internet data sources has typically been challenging due to the lack of physical information such as contact existence, location, areas, and force in this data. Prior works have generally used internet data and foundation models trained on this data to generate low-level robot behavior. We hypothesize that these data and models may be better suited to selecting among a set of basic robot behaviors to perform these contact-rich skills. We explore three methods of template selection: querying large language models, comparing video of robot execution to retrieved human video using features from a pretrained video encoder common in prior work, and performing the same comparison using features from an optic flow encoder trained on internet data. Our results show that LLMs are surprisingly capable template selectors despite their lack of visual information, optical flow encoding significantly outperforms video encoders trained with an order of magnitude more data, and important synergies exist between various forms of internet data for template selection. By exploiting these synergies, we create a template selector using multiple forms of internet data that achieves a 79\% success rate on a set of 16 different cooking skills involving tool-use.

Language agents increasingly improve by reusing skills -- structured procedural artifacts distilled from past experience. In particular, domain-level and model-generated skills are especially promising. They offer fast adaptation within a domain by encoding domain-specific recurring procedures, and they scale beyond labor-intensive hand-crafting. However, while extraction methods continue to proliferate, understanding remains limited, with no comprehensive study spanning the full skill lifecycle -- experience generation, skill extraction, and skill consumption -- to ask whether such skills actually work, when they work, and what makes them succeed or fail. To close this gap, we build a utility-grounded evaluation framework that provides systematic experimental results across extractors and target agents, covering five diverse agentic task domains. We find that model-generated skills are beneficial on average but exhibit non-trivial negative transfer, and that neither extractors nor targets behave uniformly. A model can be a strong extractor yet a weak consumer, or vice versa, with skill utility independent of model scale or baseline task strength. To explain these patterns, we then dissect each lifecycle stage in depth, analyzing how experience composition shapes skill quality, what properties characterize useful skills, and how the same skill transfers across different consumers. Finally, we translate these findings into a concrete meta-skill that guides skill extraction toward the features tied to actual utility, which consistently improves skill quality across domains and substantially reduces negative transfer.

Skill libraries enable large language model agents to reuse experience from past interactions, but most existing libraries store skills as isolated entries and retrieve them only by semantic similarity. This leads to two key challenges for compositional tasks. Firstly, an agent must identify not only relevant skills but also how they depend on and build upon each other. Secondly, it also makes library maintenance difficult, since the system lacks structural cues for deciding when skills should be merged, split, or removed. We propose SKILLGRAPH, a framework that represents reusable skills as nodes in a directed graph, with typed edges encoding prerequisite, enhancement, and co-occurrence relations. Given a new task, SKILLGRAPH retrieves not just individual skills, but an ordered skill subgraph that can guide multi-step decision making. The graph is continuously updated from agent trajectories and reinforcement learning feedback, allowing both the skill library and the agent policy to improve together. Experiments on ALFWorld, WebShop, and seven search-augmented QA tasks show that SKILLGRAPH achieves state-of-the-art performance against memory-augmented RL methods, with especially large gains on complex tasks that require composing multiple skills.

Bimanual manipulation is essential in robotics, yet developing foundation models is extremely challenging due to the inherent complexity of coordinating two robot arms (leading to multi-modal action distributions) and the scarcity of training data. In this paper, we present the Robotics Diffusion Transformer (RDT), a pioneering diffusion foundation model for bimanual manipulation. RDT builds on diffusion models to effectively represent multi-modality, with innovative designs of a scalable Transformer to deal with the heterogeneity of multi-modal inputs and to capture the nonlinearity and high frequency of robotic data. To address data scarcity, we further introduce a Physically Interpretable Unified Action Space, which can unify the action representations of various robots while preserving the physical meanings of original actions, facilitating learning transferrable physical knowledge. With these designs, we managed to pre-train RDT on the largest collection of multi-robot datasets to date and scaled it up to 1.2B parameters, which is the largest diffusion-based foundation model for robotic manipulation. We finally fine-tuned RDT on a self-created multi-task bimanual dataset with over 6K+ episodes to refine its manipulation capabilities. Experiments on real robots demonstrate that RDT significantly outperforms existing methods. It exhibits zero-shot generalization to unseen objects and scenes, understands and follows language instructions, learns new skills with just 1~5 demonstrations, and effectively handles complex, dexterous tasks. We refer to https://rdt-robotics.github.io/rdt-robotics/ for the code and videos.

Human-written agent skills encode rich workflows for real-world problem solving, but are typically used as external inference-time instructions rather than internalized as reusable model capabilities. We introduce SkillGym, a framework that transforms these skills into executable, verifiable training environments for large language model agents. Its skill-to-task pipeline instantiates concrete tasks, verifies outcomes with code-based checkers, and assesses empirical skill dependence through contrastive executions. We construct and release 2,756 environments across 12 categories and collect 8,364 successful trajectories from multiple models and harnesses, averaging 49 tool calls and over 60k logged text tokens. These resources support supervised fine-tuning on verified workflows and reinforcement learning with outcome-based rewards. Under Claude Code, supervised fine-tuning improves Qwen3.5-35B-A3B by 199 Elo on GDPval-AA v2, 19.10 percentage points on Terminal-Bench 2.1, and 28.13 and 12.38 points on SkillsBench v1.1 with and without skills, respectively. Our 35B SkillGym-Agent reaches 51.47\% on skill-assisted SkillsBench, exceeding reported scores for Claude Sonnet 4.6, GPT-5.4 Mini, and DeepSeek V4 Pro. Without skills, it also surpasses skill-assisted bases under Codex and Claude Code, suggesting reusable procedural competence.

Transferring robotic skills from simulation to reality requires task knowledge that remains usable across differences in perception, dynamics, and embodiment. We introduce Skill2Real, an agentic policy framework that learns executable skills through a shared application programming interface (API). A Proposer-Verifier-Governor (PVG) loop uses privileged simulation evidence to diagnose outcomes and validate updates, while keeping learned skills grounded in public observations and API semantics. The Cerebellum first acquires local manipulation skills; the Brain then learns task-level composition with the Cerebellum frozen. Both memories transfer to the real robot without task-policy fine-tuning or skill-memory updates. As GPT-5.6 Sol learns skills on LIBERO-90, evaluating each frozen checkpoint with GPT-6 Astra raises LIBERO-Pro Long success from 2.0% to 56.3%, without training on Pro Long. Independent Robosuite training reaches 85.1% and 89.4% mean success with Sol and Opus 5 across seven tasks, respectively. Frozen Sol-trained LIBERO-90 skills achieve 78.75% mean completion across four real-world manipulation tasks with Astra. Removing the Verifier or Governor during LIBERO-90 training lowers final Pro Long success by 17.3 and 13.3 percentage points, respectively. These results support learning and transferring a hierarchy of executable skills through a common robot interface.

Imitation learning for robotic manipulation faces a fundamental challenge: the scarcity of large-scale, high-quality robot demonstration data. Recent robotic foundation models often pre-train on cross-embodiment robot datasets to increase data scale, while they face significant limitations as the diverse morphologies and action spaces across different robot embodiments make unified training challenging. In this paper, we present H-RDT (Human to Robotics Diffusion Transformer), a novel approach that leverages human manipulation data to enhance robot manipulation capabilities. Our key insight is that large-scale egocentric human manipulation videos with paired 3D hand pose annotations provide rich behavioral priors that capture natural manipulation strategies and can benefit robotic policy learning. We introduce a two-stage training paradigm: (1) pre-training on large-scale egocentric human manipulation data, and (2) cross-embodiment fine-tuning on robot-specific data with modular action encoders and decoders. Built on a diffusion transformer architecture with 2B parameters, H-RDT uses flow matching to model complex action distributions. Extensive evaluations encompassing both simulation and real-world experiments, single-task and multitask scenarios, as well as few-shot learning and robustness assessments, demonstrate that H-RDT outperforms training from scratch and existing state-of-the-art methods, including Pi0 and RDT, achieving significant improvements of 13.9% and 40.5% over training from scratch in simulation and real-world experiments, respectively. The results validate our core hypothesis that human manipulation data can serve as a powerful foundation for learning bimanual robotic manipulation policies.

How can we scalably generate data for robotic manipulation, especially on human-like platforms such as dexterous multi-fingered hands? Learning from human videos has recently emerged as a likely answer to this question. However, difficulties in estimating hand-object interaction and crossing the human-to-robot embodiment gap have hindered the adoption of abundant monocular RGB-only human videos as the primary source of robot manipulation data. In this work, we present DO AS I DO, an algorithm to reconstruct and retarget monocular RGB human videos to multi-fingered dexterous robotic hands. DO AS I DO reconstructs hand-object interactions from various egocentric and exocentric in-the-wild video sources. The algorithm then retargets these hand-object interaction estimates into a sequence of actions executable in the real world, yielding robot-complete manipulation data from disparate human videos. Overall, DO AS I DO outperforms previous state of the art in estimating hand-object interactions and extracting dexterous manipulation trajectories from RGB videos, as we show in experiments on datasets with ground truths and on a dataset of video clips collected online. Our experiments enable us to propose an efficacy playbook for practitioners collecting human data for manipulation.

Natural language and images are commonly used as goal representations in goal-conditioned imitation learning (IL). However, natural language can be ambiguous and images can be over-specified. In this work, we propose hand-drawn sketches as a modality for goal specification in visual imitation learning. Sketches are easy for users to provide on the fly like language, but similar to images they can also help a downstream policy to be spatially-aware and even go beyond images to disambiguate task-relevant from task-irrelevant objects. We present RT-Sketch, a goal-conditioned policy for manipulation that takes a hand-drawn sketch of the desired scene as input, and outputs actions. We train RT-Sketch on a dataset of paired trajectories and corresponding synthetically generated goal sketches. We evaluate this approach on six manipulation skills involving tabletop object rearrangements on an articulated countertop. Experimentally we find that RT-Sketch is able to perform on a similar level to image or language-conditioned agents in straightforward settings, while achieving greater robustness when language goals are ambiguous or visual distractors are present. Additionally, we show that RT-Sketch has the capacity to interpret and act upon sketches with varied levels of specificity, ranging from minimal line drawings to detailed, colored drawings. For supplementary material and videos, please refer to our website: http://rt-sketch.github.io.

This work proposes a retrieve-and-transfer framework for zero-shot robotic manipulation, dubbed RAM, featuring generalizability across various objects, environments, and embodiments. Unlike existing approaches that learn manipulation from expensive in-domain demonstrations, RAM capitalizes on a retrieval-based affordance transfer paradigm to acquire versatile manipulation capabilities from abundant out-of-domain data. First, RAM extracts unified affordance at scale from diverse sources of demonstrations including robotic data, human-object interaction (HOI) data, and custom data to construct a comprehensive affordance memory. Then given a language instruction, RAM hierarchically retrieves the most similar demonstration from the affordance memory and transfers such out-of-domain 2D affordance to in-domain 3D executable affordance in a zero-shot and embodiment-agnostic manner. Extensive simulation and real-world evaluations demonstrate that our RAM consistently outperforms existing works in diverse daily tasks. Additionally, RAM shows significant potential for downstream applications such as automatic and efficient data collection, one-shot visual imitation, and LLM/VLM-integrated long-horizon manipulation. For more details, please check our website at https://yxkryptonite.github.io/RAM/.

Building reliable robot capabilities across diverse tasks requires substantial human effort to develop and maintain skills, design rewards, and integrate perception with control. We present Reconstruct, Practice, Go Real (RPG), a framework for autonomous improvement of robot execution systems without updating model weights. RPG identifies manipulation capabilities in an offline dataset and constructs related practice tasks in simulation. During practice, RPG uses execution feedback, privileged simulator state, and available dataset videos to diagnose failures. It develops new reusable symbolic skills, refines existing skills, and revises the system prompt based on these diagnoses. Cross-task evaluation tests individual candidate changes and merged revisions before they are retained for reuse. At test time, a multimodal LLM uses the resulting system prompt and skill library to coordinate perception and robot control. On held-out initializations of 22 manipulation tasks, RPG improves task success from 28.6% after the first practice round to 95.0% after 15 rounds, outperforming all evaluated baselines, including ASPIRE (75.5%) and CaP-Agent0 powered by GPT-6 Astra Pro (60.0%). After a common calibration and hardware-adaptation procedure, the frozen system succeeds in all 30 physical trials, with ten trials on each of three tasks. Project Website: https://rpg-robot.github.io/

We present a framework for robot skill acquisition, which 1) efficiently scale up data generation of language-labelled robot data and 2) effectively distills this data down into a robust multi-task language-conditioned visuo-motor policy. For (1), we use a large language model (LLM) to guide high-level planning, and sampling-based robot planners (e.g. motion or grasp samplers) for generating diverse and rich manipulation trajectories. To robustify this data-collection process, the LLM also infers a code-snippet for the success condition of each task, simultaneously enabling the data-collection process to detect failure and retry as well as the automatic labeling of trajectories with success/failure. For (2), we extend the diffusion policy single-task behavior-cloning approach to multi-task settings with language conditioning. Finally, we propose a new multi-task benchmark with 18 tasks across five domains to test long-horizon behavior, common-sense reasoning, tool-use, and intuitive physics. We find that our distilled policy successfully learned the robust retrying behavior in its data collection policy, while improving absolute success rates by 34.8% on average across five domains. The benchmark, code, and qualitative results are on our website https://www.cs.columbia.edu/~huy/scalingup/

We study the problem of functional retargeting: learning dexterous manipulation policies to track object states from human hand-object demonstrations. We focus on long-horizon, bimanual tasks with articulated objects, which is challenging due to large action space, spatiotemporal discontinuities, and embodiment gap between human and robot hands. We propose DexMachina, a novel curriculum-based algorithm: the key idea is to use virtual object controllers with decaying strength: an object is first driven automatically towards its target states, such that the policy can gradually learn to take over under motion and contact guidance. We release a simulation benchmark with a diverse set of tasks and dexterous hands, and show that DexMachina significantly outperforms baseline methods. Our algorithm and benchmark enable a functional comparison for hardware designs, and we present key findings informed by quantitative and qualitative results. With the recent surge in dexterous hand development, we hope this work will provide a useful platform for identifying desirable hardware capabilities and lower the barrier for contributing to future research. Videos and more at https://project-dexmachina.github.io/

Multi-finger robotic hand manipulation and grasping are challenging due to the high-dimensional action space and the difficulty of acquiring large-scale training data. Existing approaches largely rely on human teleoperation with wearable devices or specialized sensing equipment to capture hand-object interactions, which limits scalability. In this work, we propose VIDEOMANIP, a device-free framework that learns dexterous manipulation directly from RGB human videos. Leveraging recent advances in computer vision, VIDEOMANIP reconstructs explicit 3D robot-object trajectories from monocular videos by estimating human hand poses, object meshes, and retargets the reconstructed human motions to robotic hands for manipulation learning. To make the reconstructed robot data suitable for dexterous manipulation training, we introduce hand-object contact optimization with interaction-centric grasp modeling, as well as a demonstration synthesis strategy that generates diverse training trajectories from a single video, enabling generalizable policy learning without additional robot demonstrations. In simulation, the learned grasping model achieves a 70.25% success rate across 20 diverse objects using the Inspire Hand. In the real world, manipulation policies trained from RGB videos achieve an average 62.86% success rate across seven tasks using the LEAP Hand, outperforming retargeting-based methods by 15.87%. Project videos are available at videomanip.github.io.

Skills have become an important abstraction for enabling large language model (LLM) agents to reuse past experience in long-horizon interactive tasks. However, existing trajectory-to-skill methods often produce flat collections of high-level textual skills that are stored and retrieved independently, leaving skill relations underutilized and maintaining a gap between high-level skills and executable actions. In this paper, we propose HiSkill, a hierarchical skill graph framework that organizes interaction trajectories into a directed graph with skill nodes, AtomicOp nodes, and typed edges. Specifically, the graph connects reusable high-level skills with executable action templates, while also capturing decomposition, temporal transition, compatibility, support, and recovery relations among them. At inference time, HiSkill retrieves a compact task-relevant subgraph and performs subgraph-guided task execution, where a symbolic task state, an active skill, and the retrieved subgraph guide the LLM agent to switch skills, select AtomicOps, and ground executable actions iteratively. Experiments on three interactive environments show that HiSkill outperforms state-of-the-art baselines while reducing inference token consumption, demonstrating the effectiveness of bridging high-level skills and executable action grounding through a hierarchical skill graph. Our data and code is available at https://github.com/BUPT-GAMMA/HiSkill.

LLM agents benefit from reusable skills, yet test-time tasks often require guidance more specific than a static skill library can provide. We propose SkillTTA, a Test-Time Adaptive Skill Synthesis method that retrieves a small set of training trajectories relevant to the current task and synthesizes them into a temporary, task-specific textual skill. The solver model is kept fixed, so adaptation happens entirely through generated context rather than parameter updates. We evaluate the method on SpreadsheetBench, ALFWorld, and BigCodeBench. Compared with static trajectory-to-skill synthesis using GPT-5.5, task-specific skills improve SpreadsheetBench Pass@1 from 0.397 to 0.505 and BigCodeBench Pass@1 from 0.517 to 0.651. On ALFWorld, the method matches a heavier memory-learning baseline within four points of success rate while producing the shortest successful trajectories among reported methods. Ablations on SpreadsheetBench further show that synthesized skills outperform raw trajectory prompting, that top-k retrieval should stay small, and that failed trajectories are especially useful because they expose recurring evaluator-facing mistakes.

Recently, skills have been widely adopted in large language model (LLM)-based agent systems across various domains. In existing frameworks, skills are typically injected into the agent reasoning loop as contextual guidance once matched to a runtime task, enabling specialized task-solving capabilities. We find that this execution paradigm introduces two major sources of redundancy: irrelevant context injection and repeated skill-specific reasoning and planning. To this end, we propose SkillSmith, a boundary-first compiler-runtime framework that compiles skill packages offline into minimal executable interfaces. By extracting fine-grained operational boundaries from skills, SkillSmith enables agents to dynamically access and execute only the relevant components at runtime, thereby minimizing unnecessary context injection and redundant reasoning overhead. In the evaluation on SkillsBench benchmark, SkillSmith reduces solve-stage token usage by 57.44%, thinking iterations by 42.99%, solve time by 50.57% (2.02x faster), and token-proportional monetary cost by 57.44% compared with using raw-skills. Moreover, compiled artifacts produced by a stronger model can be reused by a smaller or more efficient runtime model, improving task accuracy in cases where raw skill interpretation fails. The source code and data are available at https://github.com/AetherHeart-AI/Aeloon.