id
stringlengths
1
5
document_id
stringclasses
98 values
passage_offset
int64
0
116k
passage_text
stringlengths
2
5.92k
annotation_id
stringclasses
887 values
annotation_text
stringlengths
1
89
offsets
listlengths
1
1
lengths
listlengths
1
1
identifier
stringlengths
0
139
⌀
type
stringclasses
8 values
infons_json
stringlengths
19
184
100
PMC12349510
7,616
Cellulose acetate propionate (CAP) (average Mn ~75,000), Tween 80, DPPH, and cinnamic acid were obtained from Sigma-Aldrich (Steinheim, Germany). Chloroform, acetone, ethanol, and calcium chloride were supplied from Avantor Performance Materials Poland S.A. (Gliwice, Poland). 2,2-Diphenyl-1-picrylhydrazyl (DPPH) was pu...
100
DPPH
[ 7924 ]
[ 4 ]
MESH:C004931
Chemical
{"identifier": "MESH:C004931", "type": "Chemical"}
101
PMC12349510
8,121
The CAP-based films incorporated with cinnamic acid were obtained by means of the casting method. Polymer (16 g) was dissolved in the mixture (500 mL) of chloroform: acetone (50:50 v/v). In the next step, plasticizer in the form of Tween 80 was introduced into the solution (0.5 g/50 mL). Finally, cinnamic acid (1, 2, a...
101
CAP
[ 8125 ]
[ 3 ]
MESH:C073473
Chemical
{"identifier": "MESH:C073473", "type": "Chemical"}
102
PMC12349510
8,121
The CAP-based films incorporated with cinnamic acid were obtained by means of the casting method. Polymer (16 g) was dissolved in the mixture (500 mL) of chloroform: acetone (50:50 v/v). In the next step, plasticizer in the form of Tween 80 was introduced into the solution (0.5 g/50 mL). Finally, cinnamic acid (1, 2, a...
102
cinnamic acid
[ 8159 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
103
PMC12349510
8,121
The CAP-based films incorporated with cinnamic acid were obtained by means of the casting method. Polymer (16 g) was dissolved in the mixture (500 mL) of chloroform: acetone (50:50 v/v). In the next step, plasticizer in the form of Tween 80 was introduced into the solution (0.5 g/50 mL). Finally, cinnamic acid (1, 2, a...
103
Polymer
[ 8219 ]
[ 7 ]
MESH:D011108
Chemical
{"identifier": "MESH:D011108", "type": "Chemical"}
104
PMC12349510
8,121
The CAP-based films incorporated with cinnamic acid were obtained by means of the casting method. Polymer (16 g) was dissolved in the mixture (500 mL) of chloroform: acetone (50:50 v/v). In the next step, plasticizer in the form of Tween 80 was introduced into the solution (0.5 g/50 mL). Finally, cinnamic acid (1, 2, a...
104
chloroform
[ 8275 ]
[ 10 ]
MESH:D002725
Chemical
{"identifier": "MESH:D002725", "type": "Chemical"}
105
PMC12349510
8,121
The CAP-based films incorporated with cinnamic acid were obtained by means of the casting method. Polymer (16 g) was dissolved in the mixture (500 mL) of chloroform: acetone (50:50 v/v). In the next step, plasticizer in the form of Tween 80 was introduced into the solution (0.5 g/50 mL). Finally, cinnamic acid (1, 2, a...
105
acetone
[ 8287 ]
[ 7 ]
MESH:D000096
Chemical
{"identifier": "MESH:D000096", "type": "Chemical"}
106
PMC12349510
8,121
The CAP-based films incorporated with cinnamic acid were obtained by means of the casting method. Polymer (16 g) was dissolved in the mixture (500 mL) of chloroform: acetone (50:50 v/v). In the next step, plasticizer in the form of Tween 80 was introduced into the solution (0.5 g/50 mL). Finally, cinnamic acid (1, 2, a...
106
Tween 80
[ 8353 ]
[ 8 ]
MESH:D011136
Chemical
{"identifier": "MESH:D011136", "type": "Chemical"}
107
PMC12349510
8,121
The CAP-based films incorporated with cinnamic acid were obtained by means of the casting method. Polymer (16 g) was dissolved in the mixture (500 mL) of chloroform: acetone (50:50 v/v). In the next step, plasticizer in the form of Tween 80 was introduced into the solution (0.5 g/50 mL). Finally, cinnamic acid (1, 2, a...
107
cinnamic acid
[ 8419 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
108
PMC12349510
8,121
The CAP-based films incorporated with cinnamic acid were obtained by means of the casting method. Polymer (16 g) was dissolved in the mixture (500 mL) of chloroform: acetone (50:50 v/v). In the next step, plasticizer in the form of Tween 80 was introduced into the solution (0.5 g/50 mL). Finally, cinnamic acid (1, 2, a...
108
acetone
[ 8480 ]
[ 7 ]
MESH:D000096
Chemical
{"identifier": "MESH:D000096", "type": "Chemical"}
109
PMC12349510
8,121
The CAP-based films incorporated with cinnamic acid were obtained by means of the casting method. Polymer (16 g) was dissolved in the mixture (500 mL) of chloroform: acetone (50:50 v/v). In the next step, plasticizer in the form of Tween 80 was introduced into the solution (0.5 g/50 mL). Finally, cinnamic acid (1, 2, a...
109
Tween80
[ 8509 ]
[ 7 ]
MESH:D011136
Chemical
{"identifier": "MESH:D011136", "type": "Chemical"}
110
PMC12349510
8,121
The CAP-based films incorporated with cinnamic acid were obtained by means of the casting method. Polymer (16 g) was dissolved in the mixture (500 mL) of chloroform: acetone (50:50 v/v). In the next step, plasticizer in the form of Tween 80 was introduced into the solution (0.5 g/50 mL). Finally, cinnamic acid (1, 2, a...
110
C-CAP
[ 8776 ]
[ 5 ]
-
Chemical
{"identifier": "-", "type": "Chemical"}
111
PMC12349510
8,121
The CAP-based films incorporated with cinnamic acid were obtained by means of the casting method. Polymer (16 g) was dissolved in the mixture (500 mL) of chloroform: acetone (50:50 v/v). In the next step, plasticizer in the form of Tween 80 was introduced into the solution (0.5 g/50 mL). Finally, cinnamic acid (1, 2, a...
111
T-Tween 80
[ 8783 ]
[ 10 ]
-
Chemical
{"identifier": "-", "type": "Chemical"}
112
PMC12349510
8,121
The CAP-based films incorporated with cinnamic acid were obtained by means of the casting method. Polymer (16 g) was dissolved in the mixture (500 mL) of chloroform: acetone (50:50 v/v). In the next step, plasticizer in the form of Tween 80 was introduced into the solution (0.5 g/50 mL). Finally, cinnamic acid (1, 2, a...
112
CA-cinnamic acid
[ 8795 ]
[ 16 ]
-
Chemical
{"identifier": "-", "type": "Chemical"}
113
PMC12349510
8,121
The CAP-based films incorporated with cinnamic acid were obtained by means of the casting method. Polymer (16 g) was dissolved in the mixture (500 mL) of chloroform: acetone (50:50 v/v). In the next step, plasticizer in the form of Tween 80 was introduced into the solution (0.5 g/50 mL). Finally, cinnamic acid (1, 2, a...
113
cinnamic acid
[ 8846 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
114
PMC12349510
8,947
Fourier-transform infrared (FTIR) spectroscopy was performed using a PerkinElmer Spectrum Two spectrometer (Llantrisant, UK), equipped with a diamond-attenuated total reflection crystal to analyze the structural properties of CAP-based films, both unmodified and modified with cinnamic acid. All spectra were recorded un...
114
CAP
[ 9173 ]
[ 3 ]
MESH:C073473
Chemical
{"identifier": "MESH:C073473", "type": "Chemical"}
115
PMC12349510
8,947
Fourier-transform infrared (FTIR) spectroscopy was performed using a PerkinElmer Spectrum Two spectrometer (Llantrisant, UK), equipped with a diamond-attenuated total reflection crystal to analyze the structural properties of CAP-based films, both unmodified and modified with cinnamic acid. All spectra were recorded un...
115
cinnamic acid
[ 9224 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
116
PMC12349510
9,417
The morphology of the samples was evaluated by scanning electron microscopy (SEM) by observing the top view of the prepared films. Before analysis, samples were metallized with sputtered gold. Investigations were conducted using a Quanta 3D FEG (FEI Company, Hillsboro, OR, USA), and the analysis was conducted by applyi...
116
gold
[ 9604 ]
[ 4 ]
MESH:D006046
Chemical
{"identifier": "MESH:D006046", "type": "Chemical"}
117
PMC12349510
10,586
2.3.4. Water Vapor Transmission Rate
117
Water
[ 10593 ]
[ 5 ]
MESH:D014867
Chemical
{"identifier": "MESH:D014867", "type": "Chemical"}
118
PMC12349510
10,623
The influence of cinnamic acid on the water vapor transmission rate (WVTR) was assessed following the procedure indicated in our earlier publication. During the experiment, the weight change of CaCl2 was monitored every 24 h over a seven-day period. The tests were conducted at a constant relative humidity of 75% and a ...
118
cinnamic acid
[ 10640 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
119
PMC12349510
10,623
The influence of cinnamic acid on the water vapor transmission rate (WVTR) was assessed following the procedure indicated in our earlier publication. During the experiment, the weight change of CaCl2 was monitored every 24 h over a seven-day period. The tests were conducted at a constant relative humidity of 75% and a ...
119
water
[ 10661 ]
[ 5 ]
MESH:D014867
Chemical
{"identifier": "MESH:D014867", "type": "Chemical"}
120
PMC12349510
10,623
The influence of cinnamic acid on the water vapor transmission rate (WVTR) was assessed following the procedure indicated in our earlier publication. During the experiment, the weight change of CaCl2 was monitored every 24 h over a seven-day period. The tests were conducted at a constant relative humidity of 75% and a ...
120
CaCl2
[ 10817 ]
[ 5 ]
MESH:D002122
Chemical
{"identifier": "MESH:D002122", "type": "Chemical"}
121
PMC12349510
11,070
The optical properties of CT and CTCA films were analyzed by recording UV-visible spectra within the 200-800 nm range using a Jasco V-650 spectrophotometer (Tokyo, Japan) operating in transmittance mode on specimens measuring 1 x 3 cm2. Each spectrum was collected at a scan speed of 400 nm min-1 and a resolution of 0.5...
121
CTCA
[ 11103 ]
[ 4 ]
-
Chemical
{"identifier": "-", "type": "Chemical"}
122
PMC12349510
11,860
The radical scavenging activity of materials based on CAP with and without the addition of cinnamic acid, reflecting their antioxidative properties, was assessed using the DPPH free radical scavenging method. Measurements were conducted with a UV-visible spectrophotometer (V-650, Jasco, Tokyo, Japan) in absorbance mode...
122
CAP
[ 11914 ]
[ 3 ]
MESH:D056693
Disease
{"identifier": "MESH:D056693", "type": "Disease"}
123
PMC12349510
11,860
The radical scavenging activity of materials based on CAP with and without the addition of cinnamic acid, reflecting their antioxidative properties, was assessed using the DPPH free radical scavenging method. Measurements were conducted with a UV-visible spectrophotometer (V-650, Jasco, Tokyo, Japan) in absorbance mode...
123
cinnamic acid
[ 11951 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
124
PMC12349510
11,860
The radical scavenging activity of materials based on CAP with and without the addition of cinnamic acid, reflecting their antioxidative properties, was assessed using the DPPH free radical scavenging method. Measurements were conducted with a UV-visible spectrophotometer (V-650, Jasco, Tokyo, Japan) in absorbance mode...
124
DPPH
[ 12032 ]
[ 4 ]
MESH:C004931
Chemical
{"identifier": "MESH:C004931", "type": "Chemical"}
125
PMC12349510
11,860
The radical scavenging activity of materials based on CAP with and without the addition of cinnamic acid, reflecting their antioxidative properties, was assessed using the DPPH free radical scavenging method. Measurements were conducted with a UV-visible spectrophotometer (V-650, Jasco, Tokyo, Japan) in absorbance mode...
125
DPPH
[ 12213 ]
[ 4 ]
MESH:C004931
Chemical
{"identifier": "MESH:C004931", "type": "Chemical"}
126
PMC12349510
11,860
The radical scavenging activity of materials based on CAP with and without the addition of cinnamic acid, reflecting their antioxidative properties, was assessed using the DPPH free radical scavenging method. Measurements were conducted with a UV-visible spectrophotometer (V-650, Jasco, Tokyo, Japan) in absorbance mode...
126
ethanol
[ 12230 ]
[ 7 ]
MESH:D000431
Chemical
{"identifier": "MESH:D000431", "type": "Chemical"}
127
PMC12349510
12,835
Fresh blueberries, free from visible physical damage, were selected and packed in the tested polymer films containing cinnamic acid, as well as films without any additives. Two packages were prepared for each type of film, with each package containing four blueberries. The formed packages were stored for seven days und...
127
polymer
[ 12928 ]
[ 7 ]
MESH:D011108
Chemical
{"identifier": "MESH:D011108", "type": "Chemical"}
128
PMC12349510
12,835
Fresh blueberries, free from visible physical damage, were selected and packed in the tested polymer films containing cinnamic acid, as well as films without any additives. Two packages were prepared for each type of film, with each package containing four blueberries. The formed packages were stored for seven days und...
128
cinnamic acid
[ 12953 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
129
PMC12349510
12,835
Fresh blueberries, free from visible physical damage, were selected and packed in the tested polymer films containing cinnamic acid, as well as films without any additives. Two packages were prepared for each type of film, with each package containing four blueberries. The formed packages were stored for seven days und...
129
blueberries
[ 12841 ]
[ 11 ]
Species
{"type": "Species"}
130
PMC12349510
12,835
Fresh blueberries, free from visible physical damage, were selected and packed in the tested polymer films containing cinnamic acid, as well as films without any additives. Two packages were prepared for each type of film, with each package containing four blueberries. The formed packages were stored for seven days und...
130
blueberries
[ 13092 ]
[ 11 ]
Species
{"type": "Species"}
131
PMC12349510
12,835
Fresh blueberries, free from visible physical damage, were selected and packed in the tested polymer films containing cinnamic acid, as well as films without any additives. Two packages were prepared for each type of film, with each package containing four blueberries. The formed packages were stored for seven days und...
131
blueberries
[ 13349 ]
[ 11 ]
Species
{"type": "Species"}
132
PMC12349510
12,835
Fresh blueberries, free from visible physical damage, were selected and packed in the tested polymer films containing cinnamic acid, as well as films without any additives. Two packages were prepared for each type of film, with each package containing four blueberries. The formed packages were stored for seven days und...
132
blueberries
[ 13638 ]
[ 11 ]
Species
{"type": "Species"}
133
PMC12349510
13,814
Antimicrobial Activity Using the ISO 20645 Method
133
ISO 20645
[ 13848 ]
[ 9 ]
-
Chemical
{"identifier": "-", "type": "Chemical"}
134
PMC12349510
13,866
To qualitatively evaluate the antimicrobial activity of the tested materials, the agar diffusion plate method was employed in accordance with ISO 20645:2004 standard ("Textile fabrics:Determination of antibacterial activity:Agar diffusion plate test"). This method is based on observing the inhibition of bacterial growt...
134
agar
[ 13948 ]
[ 4 ]
MESH:D000362
Chemical
{"identifier": "MESH:D000362", "type": "Chemical"}
135
PMC12349510
13,866
To qualitatively evaluate the antimicrobial activity of the tested materials, the agar diffusion plate method was employed in accordance with ISO 20645:2004 standard ("Textile fabrics:Determination of antibacterial activity:Agar diffusion plate test"). This method is based on observing the inhibition of bacterial growt...
135
Agar
[ 14090 ]
[ 4 ]
MESH:D000362
Chemical
{"identifier": "MESH:D000362", "type": "Chemical"}
136
PMC12349510
13,866
To qualitatively evaluate the antimicrobial activity of the tested materials, the agar diffusion plate method was employed in accordance with ISO 20645:2004 standard ("Textile fabrics:Determination of antibacterial activity:Agar diffusion plate test"). This method is based on observing the inhibition of bacterial growt...
136
agar
[ 14241 ]
[ 4 ]
MESH:D000362
Chemical
{"identifier": "MESH:D000362", "type": "Chemical"}
137
PMC12349510
14,301
Typically, model bacterial strains such as Staphylococcus aureus (ATCC 6538), Escherichia coli (ATCC 11229), and Pseudomonas aeruginosa (ATCC 8739) are used. The test material (e.g., polymeric film, coated textile, or functional composite), usually in the form of a 25 mm diameter disc, is placed on the inoculated agar ...
137
agar
[ 14616 ]
[ 4 ]
MESH:D000362
Chemical
{"identifier": "MESH:D000362", "type": "Chemical"}
138
PMC12349510
14,301
Typically, model bacterial strains such as Staphylococcus aureus (ATCC 6538), Escherichia coli (ATCC 11229), and Pseudomonas aeruginosa (ATCC 8739) are used. The test material (e.g., polymeric film, coated textile, or functional composite), usually in the form of a 25 mm diameter disc, is placed on the inoculated agar ...
138
polymer
[ 15281 ]
[ 7 ]
MESH:D011108
Chemical
{"identifier": "MESH:D011108", "type": "Chemical"}
139
PMC12349510
14,301
Typically, model bacterial strains such as Staphylococcus aureus (ATCC 6538), Escherichia coli (ATCC 11229), and Pseudomonas aeruginosa (ATCC 8739) are used. The test material (e.g., polymeric film, coated textile, or functional composite), usually in the form of a 25 mm diameter disc, is placed on the inoculated agar ...
139
ATCC 6538
[ 14367 ]
[ 9 ]
CVCL:0023
CellLine
{"identifier": "CVCL:0023", "type": "CellLine"}
140
PMC12349510
14,301
Typically, model bacterial strains such as Staphylococcus aureus (ATCC 6538), Escherichia coli (ATCC 11229), and Pseudomonas aeruginosa (ATCC 8739) are used. The test material (e.g., polymeric film, coated textile, or functional composite), usually in the form of a 25 mm diameter disc, is placed on the inoculated agar ...
140
ATCC 11229
[ 14397 ]
[ 10 ]
CVCL:GF48
CellLine
{"identifier": "CVCL:GF48", "type": "CellLine"}
141
PMC12349510
14,301
Typically, model bacterial strains such as Staphylococcus aureus (ATCC 6538), Escherichia coli (ATCC 11229), and Pseudomonas aeruginosa (ATCC 8739) are used. The test material (e.g., polymeric film, coated textile, or functional composite), usually in the form of a 25 mm diameter disc, is placed on the inoculated agar ...
141
ATCC 8739
[ 14438 ]
[ 9 ]
CVCL:0023
CellLine
{"identifier": "CVCL:0023", "type": "CellLine"}
142
PMC12349510
14,301
Typically, model bacterial strains such as Staphylococcus aureus (ATCC 6538), Escherichia coli (ATCC 11229), and Pseudomonas aeruginosa (ATCC 8739) are used. The test material (e.g., polymeric film, coated textile, or functional composite), usually in the form of a 25 mm diameter disc, is placed on the inoculated agar ...
142
Staphylococcus aureus
[ 14344 ]
[ 21 ]
1280
Species
{"identifier": "1280", "type": "Species"}
143
PMC12349510
14,301
Typically, model bacterial strains such as Staphylococcus aureus (ATCC 6538), Escherichia coli (ATCC 11229), and Pseudomonas aeruginosa (ATCC 8739) are used. The test material (e.g., polymeric film, coated textile, or functional composite), usually in the form of a 25 mm diameter disc, is placed on the inoculated agar ...
143
Escherichia coli
[ 14379 ]
[ 16 ]
562
Species
{"identifier": "562", "type": "Species"}
144
PMC12349510
14,301
Typically, model bacterial strains such as Staphylococcus aureus (ATCC 6538), Escherichia coli (ATCC 11229), and Pseudomonas aeruginosa (ATCC 8739) are used. The test material (e.g., polymeric film, coated textile, or functional composite), usually in the form of a 25 mm diameter disc, is placed on the inoculated agar ...
144
Pseudomonas aeruginosa
[ 14414 ]
[ 22 ]
287
Species
{"identifier": "287", "type": "Species"}
145
PMC12349510
15,815
The procedure involves applying a suspension of model microorganisms, typically Staphylococcus aureus (ATCC 6538P) and Escherichia coli (ATCC 8739), Pseudomonas aeruginosa (ATCC 8739), onto the surface of the test sample, which is then covered with a polyethylene film to ensure uniform contact and to prevent drying. Sa...
145
polyethylene
[ 16066 ]
[ 12 ]
MESH:D020959
Chemical
{"identifier": "MESH:D020959", "type": "Chemical"}
146
PMC12349510
15,815
The procedure involves applying a suspension of model microorganisms, typically Staphylococcus aureus (ATCC 6538P) and Escherichia coli (ATCC 8739), Pseudomonas aeruginosa (ATCC 8739), onto the surface of the test sample, which is then covered with a polyethylene film to ensure uniform contact and to prevent drying. Sa...
146
Staphylococcus aureus
[ 15895 ]
[ 21 ]
1280
Species
{"identifier": "1280", "type": "Species"}
147
PMC12349510
15,815
The procedure involves applying a suspension of model microorganisms, typically Staphylococcus aureus (ATCC 6538P) and Escherichia coli (ATCC 8739), Pseudomonas aeruginosa (ATCC 8739), onto the surface of the test sample, which is then covered with a polyethylene film to ensure uniform contact and to prevent drying. Sa...
147
ATCC 6538P
[ 15918 ]
[ 10 ]
Species
{"type": "Species"}
148
PMC12349510
15,815
The procedure involves applying a suspension of model microorganisms, typically Staphylococcus aureus (ATCC 6538P) and Escherichia coli (ATCC 8739), Pseudomonas aeruginosa (ATCC 8739), onto the surface of the test sample, which is then covered with a polyethylene film to ensure uniform contact and to prevent drying. Sa...
148
Escherichia coli
[ 15934 ]
[ 16 ]
562
Species
{"identifier": "562", "type": "Species"}
149
PMC12349510
15,815
The procedure involves applying a suspension of model microorganisms, typically Staphylococcus aureus (ATCC 6538P) and Escherichia coli (ATCC 8739), Pseudomonas aeruginosa (ATCC 8739), onto the surface of the test sample, which is then covered with a polyethylene film to ensure uniform contact and to prevent drying. Sa...
149
ATCC 8739
[ 15952 ]
[ 9 ]
Species
{"type": "Species"}
150
PMC12349510
15,815
The procedure involves applying a suspension of model microorganisms, typically Staphylococcus aureus (ATCC 6538P) and Escherichia coli (ATCC 8739), Pseudomonas aeruginosa (ATCC 8739), onto the surface of the test sample, which is then covered with a polyethylene film to ensure uniform contact and to prevent drying. Sa...
150
Pseudomonas aeruginosa
[ 15964 ]
[ 22 ]
287
Species
{"identifier": "287", "type": "Species"}
151
PMC12349510
15,815
The procedure involves applying a suspension of model microorganisms, typically Staphylococcus aureus (ATCC 6538P) and Escherichia coli (ATCC 8739), Pseudomonas aeruginosa (ATCC 8739), onto the surface of the test sample, which is then covered with a polyethylene film to ensure uniform contact and to prevent drying. Sa...
151
ATCC 8739
[ 15988 ]
[ 9 ]
Species
{"type": "Species"}
152
PMC12349510
17,099
To assess whether differences between films containing various concentrations of cinnamic acid were statistically significant (p <= 0.05), a Student's t-test was performed. The null hypothesis stated that there was no difference between the groups. If the calculated t-value exceeded the critical value from the statisti...
152
cinnamic acid
[ 17180 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
153
PMC12349510
17,704
In order to determine the influence of the presence of cinnamic acid on the structure of the studied materials, an analysis using the FTIR technique was carried out. The obtained spectra are presented in Figure 3. They show bands characteristic of CAP, Tween 80, and cinnamic acid. A broad, intense band with a maximum a...
153
cinnamic acid
[ 17759 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
154
PMC12349510
17,704
In order to determine the influence of the presence of cinnamic acid on the structure of the studied materials, an analysis using the FTIR technique was carried out. The obtained spectra are presented in Figure 3. They show bands characteristic of CAP, Tween 80, and cinnamic acid. A broad, intense band with a maximum a...
154
Tween 80
[ 17957 ]
[ 8 ]
MESH:D011136
Chemical
{"identifier": "MESH:D011136", "type": "Chemical"}
155
PMC12349510
17,704
In order to determine the influence of the presence of cinnamic acid on the structure of the studied materials, an analysis using the FTIR technique was carried out. The obtained spectra are presented in Figure 3. They show bands characteristic of CAP, Tween 80, and cinnamic acid. A broad, intense band with a maximum a...
155
cinnamic acid
[ 17971 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
156
PMC12349510
17,704
In order to determine the influence of the presence of cinnamic acid on the structure of the studied materials, an analysis using the FTIR technique was carried out. The obtained spectra are presented in Figure 3. They show bands characteristic of CAP, Tween 80, and cinnamic acid. A broad, intense band with a maximum a...
156
Tween 80
[ 18123 ]
[ 8 ]
MESH:D011136
Chemical
{"identifier": "MESH:D011136", "type": "Chemical"}
157
PMC12349510
17,704
In order to determine the influence of the presence of cinnamic acid on the structure of the studied materials, an analysis using the FTIR technique was carried out. The obtained spectra are presented in Figure 3. They show bands characteristic of CAP, Tween 80, and cinnamic acid. A broad, intense band with a maximum a...
157
cinnamic acid
[ 18144 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
158
PMC12349510
17,704
In order to determine the influence of the presence of cinnamic acid on the structure of the studied materials, an analysis using the FTIR technique was carried out. The obtained spectra are presented in Figure 3. They show bands characteristic of CAP, Tween 80, and cinnamic acid. A broad, intense band with a maximum a...
158
cinnamic acid
[ 18251 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
159
PMC12349510
17,704
In order to determine the influence of the presence of cinnamic acid on the structure of the studied materials, an analysis using the FTIR technique was carried out. The obtained spectra are presented in Figure 3. They show bands characteristic of CAP, Tween 80, and cinnamic acid. A broad, intense band with a maximum a...
159
esters
[ 18713 ]
[ 6 ]
MESH:D004952
Chemical
{"identifier": "MESH:D004952", "type": "Chemical"}
160
PMC12349510
17,704
In order to determine the influence of the presence of cinnamic acid on the structure of the studied materials, an analysis using the FTIR technique was carried out. The obtained spectra are presented in Figure 3. They show bands characteristic of CAP, Tween 80, and cinnamic acid. A broad, intense band with a maximum a...
160
ester
[ 18883 ]
[ 5 ]
MESH:D004952
Chemical
{"identifier": "MESH:D004952", "type": "Chemical"}
161
PMC12349510
17,704
In order to determine the influence of the presence of cinnamic acid on the structure of the studied materials, an analysis using the FTIR technique was carried out. The obtained spectra are presented in Figure 3. They show bands characteristic of CAP, Tween 80, and cinnamic acid. A broad, intense band with a maximum a...
161
acetate esters
[ 18914 ]
[ 14 ]
-
Chemical
{"identifier": "-", "type": "Chemical"}
162
PMC12349510
17,704
In order to determine the influence of the presence of cinnamic acid on the structure of the studied materials, an analysis using the FTIR technique was carried out. The obtained spectra are presented in Figure 3. They show bands characteristic of CAP, Tween 80, and cinnamic acid. A broad, intense band with a maximum a...
162
propionate esters
[ 18953 ]
[ 17 ]
-
Chemical
{"identifier": "-", "type": "Chemical"}
163
PMC12349510
19,005
As a result of introducing cinnamic acid into the CT system, two new bands have been recorded at 1630 and 1580 cm-1 The band at 1630 cm-1 can be attributed to the stretching vibrations of aliphatic C=C, while the band at 1580 cm-1 hints at stretching vibrations of the C=C system in the aromatic ring of cinnamic acid. T...
163
cinnamic acid
[ 19032 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
164
PMC12349510
19,005
As a result of introducing cinnamic acid into the CT system, two new bands have been recorded at 1630 and 1580 cm-1 The band at 1630 cm-1 can be attributed to the stretching vibrations of aliphatic C=C, while the band at 1580 cm-1 hints at stretching vibrations of the C=C system in the aromatic ring of cinnamic acid. T...
164
cinnamic acid
[ 19309 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
165
PMC12349510
19,005
As a result of introducing cinnamic acid into the CT system, two new bands have been recorded at 1630 and 1580 cm-1 The band at 1630 cm-1 can be attributed to the stretching vibrations of aliphatic C=C, while the band at 1580 cm-1 hints at stretching vibrations of the C=C system in the aromatic ring of cinnamic acid. T...
165
cinnamic acid
[ 19415 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
166
PMC12349510
19,705
It is widely recognized that integrating SEM and AFM enables the analysis of the morphology and topography of polymers containing active components, which is essential for the design of advanced materials. The top-view morphologies of the prepared films were studied through SEM. Figure 4A shows a smooth and uniform sur...
166
polymers
[ 19815 ]
[ 8 ]
MESH:D011108
Chemical
{"identifier": "MESH:D011108", "type": "Chemical"}
167
PMC12349510
19,705
It is widely recognized that integrating SEM and AFM enables the analysis of the morphology and topography of polymers containing active components, which is essential for the design of advanced materials. The top-view morphologies of the prepared films were studied through SEM. Figure 4A shows a smooth and uniform sur...
167
cinnamic acid
[ 20104 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
168
PMC12349510
19,705
It is widely recognized that integrating SEM and AFM enables the analysis of the morphology and topography of polymers containing active components, which is essential for the design of advanced materials. The top-view morphologies of the prepared films were studied through SEM. Figure 4A shows a smooth and uniform sur...
168
cinnamic acid
[ 20484 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
169
PMC12349510
19,705
It is widely recognized that integrating SEM and AFM enables the analysis of the morphology and topography of polymers containing active components, which is essential for the design of advanced materials. The top-view morphologies of the prepared films were studied through SEM. Figure 4A shows a smooth and uniform sur...
169
chitosan
[ 20582 ]
[ 8 ]
MESH:D048271
Chemical
{"identifier": "MESH:D048271", "type": "Chemical"}
170
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
170
polymer
[ 20658 ]
[ 7 ]
MESH:D011108
Chemical
{"identifier": "MESH:D011108", "type": "Chemical"}
171
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
171
polymer
[ 20797 ]
[ 7 ]
MESH:D011108
Chemical
{"identifier": "MESH:D011108", "type": "Chemical"}
172
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
172
polymer
[ 20903 ]
[ 7 ]
MESH:D011108
Chemical
{"identifier": "MESH:D011108", "type": "Chemical"}
173
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
173
polymer
[ 21017 ]
[ 7 ]
MESH:D011108
Chemical
{"identifier": "MESH:D011108", "type": "Chemical"}
174
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
174
cinnamic acid
[ 21303 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
175
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
175
polymer
[ 21510 ]
[ 7 ]
MESH:D011108
Chemical
{"identifier": "MESH:D011108", "type": "Chemical"}
176
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
176
cinnamic acid
[ 21731 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
177
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
177
Tween 80
[ 22093 ]
[ 8 ]
MESH:D011136
Chemical
{"identifier": "MESH:D011136", "type": "Chemical"}
178
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
178
polymer
[ 22130 ]
[ 7 ]
MESH:D011108
Chemical
{"identifier": "MESH:D011108", "type": "Chemical"}
179
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
179
cinnamic acid
[ 22199 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
180
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
180
cinnamic acid
[ 22385 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
181
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
181
cinnamic acid
[ 22635 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
182
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
182
Tween 80
[ 22689 ]
[ 8 ]
MESH:D011136
Chemical
{"identifier": "MESH:D011136", "type": "Chemical"}
183
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
183
cellulose acetate propionate
[ 22727 ]
[ 28 ]
MESH:C073473
Chemical
{"identifier": "MESH:C073473", "type": "Chemical"}
184
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
184
CAP
[ 22757 ]
[ 3 ]
MESH:C073473
Chemical
{"identifier": "MESH:C073473", "type": "Chemical"}
185
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
185
Tween 80
[ 22766 ]
[ 8 ]
MESH:D011136
Chemical
{"identifier": "MESH:D011136", "type": "Chemical"}
186
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
186
Cinnamic acid
[ 22828 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
187
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
187
CAP
[ 22973 ]
[ 3 ]
MESH:C073473
Chemical
{"identifier": "MESH:C073473", "type": "Chemical"}
188
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
188
polymer
[ 22977 ]
[ 7 ]
MESH:D011108
Chemical
{"identifier": "MESH:D011108", "type": "Chemical"}
189
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
189
polymer
[ 23040 ]
[ 7 ]
MESH:D011108
Chemical
{"identifier": "MESH:D011108", "type": "Chemical"}
190
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
190
cinnamic acid
[ 23063 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
191
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
191
polymer
[ 23161 ]
[ 7 ]
MESH:D011108
Chemical
{"identifier": "MESH:D011108", "type": "Chemical"}
192
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
192
CAP
[ 23241 ]
[ 3 ]
MESH:C073473
Chemical
{"identifier": "MESH:C073473", "type": "Chemical"}
193
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
193
Tween 80
[ 23298 ]
[ 8 ]
MESH:D011136
Chemical
{"identifier": "MESH:D011136", "type": "Chemical"}
194
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
194
cinnamic acid
[ 23341 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
195
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
195
polymer
[ 23398 ]
[ 7 ]
MESH:D011108
Chemical
{"identifier": "MESH:D011108", "type": "Chemical"}
196
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
196
cinnamic acid
[ 23521 ]
[ 13 ]
MESH:C029010
Chemical
{"identifier": "MESH:C029010", "type": "Chemical"}
197
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
197
CAP
[ 23542 ]
[ 3 ]
MESH:C073473
Chemical
{"identifier": "MESH:C073473", "type": "Chemical"}
198
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
198
Tween80
[ 23546 ]
[ 7 ]
MESH:D011136
Chemical
{"identifier": "MESH:D011136", "type": "Chemical"}
199
PMC12349510
20,630
Additives introduced into a polymer can interact with it in either a chemical or physical manner. Chemical interactions lead to reactions between the additive and the polymer, resulting in processes such as cross-linking or structural stabilization, thereby protecting the polymer, for example, against degradation. Addi...
199
polymer
[ 23615 ]
[ 7 ]
MESH:D011108
Chemical
{"identifier": "MESH:D011108", "type": "Chemical"}